|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-01-2019, 06:42 AM | #1 |
Senior Member
Join Date: Mar 2011
Location: faucett, mo
Posts: 419
|
40 ford wiring help
The wiring harness that runs past the horns, three wires stick out, one is power for the horn relay, what are the other two for. The column wire hooks up for the ground wire on the relay, and the two horn wires use up the two left over terminals on the relay so what are the two wires still sticking out of the harness with nothing around to hook them to? Thanks for any help
|
10-01-2019, 07:48 AM | #2 |
Senior Member
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 303
|
Re: 40 ford wiring help
My factory horn is long gone so I didn't have to deal with this when I rewired mine. But the VanPelt diagram shows the single one that comes out closest to the firewall connects to the horn button wire from the column. The two that come out together go to the horn relay. The horn relay shows two wires in from the harness and two wires out, one to each horn. Hope that helps.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-01-2019, 07:57 AM | #3 | |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 40 ford wiring help
Quote:
|
|
10-01-2019, 04:00 PM | #4 |
MEMBER EMERITUS
Join Date: May 2010
Location: New Zealand
Posts: 1,380
|
Re: 40 ford wiring help
Oil pressure and dimmer switch ?
|
10-01-2019, 05:22 PM | #5 |
Senior Member
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
|
Re: 40 ford wiring help
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|