Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-06-2019, 03:27 PM   #1
KiWinUS
Senior Member
 
KiWinUS's Avatar
 
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,946
Default Source 59AB large port Intake gaskets

Guys who has best deal on large port 59AB intake gaskets.
Thanks
KiWinUS is online now   Reply With Quote
Old 11-06-2019, 04:01 PM   #2
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: Source 59AB large port Intake gaskets

If your ports are as big as they should be, no one makes them commercially.
Get your little gasket tapping hammer out.
Pete is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-06-2019, 05:24 PM   #3
Lawrie
Senior Member
 
Lawrie's Avatar
 
Join Date: May 2010
Location: Qld, Australia
Posts: 4,197
Default Re: Source 59AB large port Intake gaskets

We just made a set for the dragster eng refresh,
we got a sheet of proper material from the supplier and made them our self,my boy even cut the port holes in them on an angle so there wasn't a step.
Lawrie
Lawrie is offline   Reply With Quote
Old 11-06-2019, 07:39 PM   #4
Bored&Stroked
Senior Member
 
Bored&Stroked's Avatar
 
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,013
Default Re: Source 59AB large port Intake gaskets

I tend to use BestGaskets - then port them with an Xacto knife . . .
Bored&Stroked is online now   Reply With Quote
Old 11-07-2019, 07:30 AM   #5
Bored&Stroked
Senior Member
 
Bored&Stroked's Avatar
 
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,013
Default Re: Source 59AB large port Intake gaskets

Best Gasket Big Port intake gasket sets: 21055E (59A) - or 21046E (49-53)

https://bestgasket.com/
Bored&Stroked is online now   Reply With Quote
Old 11-07-2019, 07:35 AM   #6
uncle max
Senior Member
 
uncle max's Avatar
 
Join Date: May 2010
Location: SLC Utah
Posts: 798
Default Re: Source 59AB large port Intake gaskets

Sponsored Links (Register now to hide all advertisements)
Arman at Best Gasket will sell you a blank gasket with the correct outside perimeter and bolt holes; then it's up to you and your knife.
__________________
RIP Tyler... My Son, Helper & Best Friend.
Feb '78 to Father's Day '10.
www.97-express.com ~ [email protected]
uncle max is offline   Reply With Quote
Old 11-07-2019, 10:51 AM   #7
Ol' Ron
Senior Member
 
Ol' Ron's Avatar
 
Join Date: May 2010
Location: Chester Vt
Posts: 8,842
Default Re: Source 59AB large port Intake gaskets

What's the application of the engine? Having built a few street engines, I find the stock ports do a fine job. Compression and displacement, my 280 with EAB can is one of them.
Ol' Ron is offline   Reply With Quote
Old 11-07-2019, 02:00 PM   #8
marko39
Senior Member
 
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,038
Default Re: Source 59AB large port Intake gaskets

I have one for a 8ba build made by Best and it is already cut properly but you could trim more if needed. Got it rrom Hot Rod And Custom Supply. Price was 10.95 in 2001. Maybe I will finish engine someday.
marko39 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:59 AM.