Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-20-2020, 09:56 PM   #1
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default REM coated gears

Since this serious corona virus has us slow at work, I thought I would build two transmissions that are for a person in Sweden tonight that have been awaiting for a while. Thought I would share just how beautiful the REM coating process makes the gears.


Sent from my iPhone using Tapatalk
35fordtn is offline   Reply With Quote
Old 03-20-2020, 09:58 PM   #2
AlexLohmann1
Senior Member
 
AlexLohmann1's Avatar
 
Join Date: Aug 2016
Location: Southern Illinois
Posts: 230
Default Re: REM coated gears

Looks great!

Sent from my SM-G986U using Tapatalk
AlexLohmann1 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-20-2020, 10:27 PM   #3
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,646
Default Re: REM coated gears

Michael,
What is that process exactly? I’ve never heard of it.
Thanks,
Ralph
RalphM is offline   Reply With Quote
Old 03-20-2020, 11:01 PM   #4
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: REM coated gears

Quote:
Originally Posted by RalphM View Post
Michael,
What is that process exactly? I’ve never heard of it.
Thanks,
Ralph

I've posted a link to the REM website. Makes it much easier to understand than trying to do a verbal. Click the link! DD


https://www.procryo.com/RemGears.html
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 03-21-2020, 12:18 AM   #5
RobR'35
Senior Member
 
RobR'35's Avatar
 
Join Date: Dec 2014
Location: Upper Peninsula, Michigan
Posts: 604
Default Re: REM coated gears

Almost looks too good to hide in the gear box.
RobR'35 is offline   Reply With Quote
Old 03-21-2020, 06:58 AM   #6
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: REM coated gears

Sponsored Links (Register now to hide all advertisements)
Really not meant just for looks but for performance enhancement as shown in the spec's on the web site.


Attached Images
File Type: jpg REM.JPG (89.0 KB, 300 views)
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 03-21-2020, 08:10 AM   #7
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,931
Default Re: REM coated gears

Interesting.
corvette8n is offline   Reply With Quote
Old 03-21-2020, 08:19 AM   #8
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: REM coated gears

What is the cost to do a set of gears?
Kurt in NJ is offline   Reply With Quote
Old 03-21-2020, 08:56 AM   #9
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,144
Default Re: REM coated gears

Quote:
Originally Posted by Kurt in NJ View Post
What is the cost to do a set of gears?
Curious as well
Tim Ayers is offline   Reply With Quote
Old 03-21-2020, 09:50 AM   #10
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
Default Re: REM coated gears

What is the benefit, Michael? Does it cause issues on the closely toleranced fitting items like the splines?

Mart.
Mart is offline   Reply With Quote
Old 03-21-2020, 10:00 AM   #11
36rgtop
Senior Member
 
36rgtop's Avatar
 
Join Date: Jun 2013
Location: east coast
Posts: 113
Default Re: REM coated gears

According to web page this coating is aimed at racing to improve performance.
Seriously doubt that any improvement in a street car will even be noticed.
And it does not eliminate broken gear teeth or failed bearings.
36rgtop is offline   Reply With Quote
Old 03-21-2020, 10:21 AM   #12
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default Re: REM coated gears

Cyro-Rem, is two processes. Cyro is the Cyrogenic treating of the gears which increases their ductile strength, which in turn reduces wear and fatigue. I usually do not have the Cyro done as it is only a 5-10% increase in base metal strength, however if a person had the $$ it would be worth while on Low Reverse sliding gears and the cluster/ or even a Lincoln gear set that has extreme torque and stress in first gear

Rem Coating is a patented technology that removes only the high spots from areas like pitting or more importantly machining marks. I primarily only use it when using NEW reproduction gears, and have used it on Rearend gears as well. I also had a camshaft done for a engine I am building for myself.

It does increase tolerances a minimal amount. In a recent batch a dial indicator showed a .0018 change from before and after. Assembling a transmission or really anything that has been Rem Coated is a real pleasure as everything assembles so much easier. I have driven only one Early Ford transmission that had reproduction lincoln gears. It was one of the best shifting Early Ford Transmissions I have driven but... I cannot say whether that was due to the Rem Coating or not.

It is expensive.. A transmission gear set is usually $200-300 depending on which company you have do the work, and a ring and pinion usually is $100-150 and other parts vary..

It is likely not a huge improvement given cost on a flathead (considering how little we drive these cars) car unless you are going for a salt flats record, but if you are using reproduction gears or if you have a little bit of Money burning a hole in your pocket it is a worthwhile investment.

I only build a couple transmissions a year, but I have built several for one customer that is ovreseas. Ever since I did one with the Rem Coating, he now insists that all his be done that way. I recently had a set done and a Ring and Pinion done for my 36 Pickup which is a long ways from being finished.

What sold me on it was comparing a NEW Melling oil pump that I had the shaft and gears done, in comparision to a NEW off the shelf same melling pump. You could really feel a huge difference. One place I had used in the past primarily only did power generating Windmill shafts and bearings for a manufacturer. They claimed the windmills lastly 15% longer before needing service on the bearings
35fordtn is offline   Reply With Quote
Old 03-21-2020, 10:34 AM   #13
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
Default Re: REM coated gears

I know all the race teams use if not this process, one just like it. Probably common in the aviation business. I believe it would increase the longevity of the parts. Not that makes any sense for us old guys!
A friend with an Ardun pretty much used different kinds of coatings on almost all the internal parts. Cams, lifters, rockers, gears, non scuff coatings and thermal coatings on pistons.
Then again, his neighbor owns the business that does this stuff.
deuce_roadster is offline   Reply With Quote
Old 03-21-2020, 11:17 AM   #14
Krylon32
Senior Member
 
Join Date: May 2010
Posts: 4,430
Default Re: REM coated gears

I have sold many Winters QC rears with REM coated spur gears and they are quieter than the uncoated gears so I can understand why. My question is about coating a cam shaft. What is the advantage, how much does it cost and how long does it take? Where does one get this done? I'm building a new French FH and would use this process if there's an advantage. Thanks
Krylon32 is offline   Reply With Quote
Old 03-21-2020, 11:19 AM   #15
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,646
Default Re: REM coated gears

I wish my neighbor had a chrome shop!
RalphM is offline   Reply With Quote
Old 03-21-2020, 11:40 AM   #16
Charlie ny
BANNED
 
Join Date: May 2010
Posts: 3,019
Default Re: REM coated gears

This process under various names was a huge positive in heavy industry. Hardened

rails that cast iron engine blocks slid on from station to station would after some use
begin marking machined surfaces on the blocks. After this process the rails felt slippery
to the touch and no longer marks heavy iron parts.
Charlie ny
Charlie ny is offline   Reply With Quote
Old 03-21-2020, 12:02 PM   #17
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
Default Re: REM coated gears

Krylon32 The place I mentioned is:
https://www.performancecoatings.com/
in the Seattle area (Auburn). Their website has prices and a camshaft is 8$ per cylinder so $64. Look under their "internal coatings" Not a Cryo-Rem process
They did the Cermachrome on my avatar intake and headers. Still looks good 20 years later.

Last edited by deuce_roadster; 03-21-2020 at 12:13 PM.
deuce_roadster is offline   Reply With Quote
Old 03-21-2020, 12:15 PM   #18
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: REM coated gears

While they didn't use the cryogenic stress relief process, they did us the vibratory tumblers to polish parts when I worked at the Army Depot down in Corpus Christi. They were used for polishing used parts with minimal material loss.

Cryogenic stress relief with liquid nitrogen is used for a lot of manufacturing processes depending on the material being used. It hardens the surface and relieves stresses. I'm not sure of the benefit of a sacrificial coating, it may be to reduce surface loss during the vibratory polishing process that would guarantee good dimensional accuracy of the part after the completion of the process.
rotorwrench is offline   Reply With Quote
Old 03-21-2020, 11:57 PM   #19
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: REM coated gears

"or even a Lincoln gear set that has extreme torque and stress in first gear"

A 25 or 26 tooth Lincoln gear set has LESS torque multiplication in 1st and second than a stock 28 or 29 set. That is why they will last longer in a performance application.
Pete is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:37 PM.