Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-06-2018, 11:04 PM   #1
Dtolson9
Member
 
Join Date: Apr 2016
Posts: 78
Default 1928 Tudor sedan rear seat

Does anyone have any pictures of how the rear seat backrest is mounted in a 28/29 sedan?

Thanks
David
Dtolson9 is offline   Reply With Quote
Old 08-07-2018, 12:27 AM   #2
Bill G
Senior Member
 
Bill G's Avatar
 
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 1,044
Default Re: 1928 Tudor sedan rear seat

No pictures but the top of the frame steel hangs from two metal hangers just below and to either side of the rear window. At the bottom of the seat back are heavy wire loops that hang down and small bolts screw it to two tabs that have holes in them.

At least this is how my 29 attaches which should be the same as 28
Bill G is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-07-2018, 04:54 AM   #3
Steve Plucker
BANNED
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
Default Re: 1928 Tudor sedan rear seat

Bill, I think there were two ways in attaching the rear seat in the 28-29 Tudors. I think there is a past post on this very subject.

Tom Wesenberg...I think you have the answer to this one???...I think.

Pluck
Steve Plucker is offline   Reply With Quote
Old 08-07-2018, 06:28 PM   #4
Randy in ca
Senior Member
 
Randy in ca's Avatar
 
Join Date: May 2010
Posts: 1,628
Default Re: 1928 Tudor sedan rear seat

Marco Tahtarus once answered this question with a picture of a transition Tudor that had both methods of attaching the top of the seat back - link below.


https://www.fordbarn.com/forum/showthread.php?t=60542
Randy in ca is offline   Reply With Quote
Old 08-08-2018, 01:55 AM   #5
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: 1928 Tudor sedan rear seat

Sponsored Links (Register now to hide all advertisements)
The picture in Marco's reply is the picture I posted of my 2-23-29 Tudor. This is the transition period of how the top of the rear seat backrest was mounted. The bottom of the backrest has 2 studs in the body for the 2 metal wires to be bolted to.
Tom Wesenberg is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:18 AM.