|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-22-2020, 08:26 PM | #1 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,067
|
Window crank, garnish molding screws/washers
City:
SF Bay Area
State:
CA
Sponsored Links (Register now to hide all advertisements)
Folks - looking for an "mature" window crank for my 1930 Murray Town Sedan. It's called "scroll type" in the aftermarket parts catalogues, and is Style "M" in the MAFCA judging standards. Also looking for at least two sets of the original oval head screw and cup washer that attaches the garnish molding to the door frame. I know both of these are readily available aftermarket, but the car has an unrestored interior and I'd like to keep all the hardware consistent. Condition of the finish isn't too important as long as the handle isn't frozen and there aren't major dings, cracks, gouges, etc. I may eventually replate the door and garnish molding hardware but it will be the original nickel, not the chrome of the aftermarket parts. Thanks. Please reply to [email protected]. JayJay
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan Last edited by JayJay; 12-28-2020 at 11:42 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|