Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-15-2019, 08:00 AM   #1
Chantruese
Junior Member
 
Join Date: May 2019
Posts: 2
Default Trying to Identify Some Parts

Good morning! We've got some parts that we got that are supposed to be for a 30-31 Ford, but they weren't in boxes and didn't come labeled, so I have no idea what they are. A couple of these things look like headboards!

Any chance the forums know what these are? Thanks for any help!







Chantruese is offline   Reply With Quote
Old 05-15-2019, 08:14 AM   #2
leo
Senior Member
 
leo's Avatar
 
Join Date: May 2010
Location: New Jersey
Posts: 734
Default Re: Trying to Identify Some Parts

Well picture 3 is a pair of Model A rear window shade holders, picture 4 is appears to be part of a seat frame of unknown origin......
leo is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-15-2019, 08:58 AM   #3
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: Trying to Identify Some Parts

Photo No. 1 looks to be ID numbers stamped into some part of a vehicle. Ford only stamped the Model A engines above the coolant inlet and then on the left frame near the clutch pedal location. The ID code was begin with a star and ended with a star if they're Ford but I cant even tell if that parts are steel or cast iron from the photos plus I don't see any stars.
rotorwrench is online now   Reply With Quote
Old 05-15-2019, 09:14 AM   #4
DD931
Senior Member
 
DD931's Avatar
 
Join Date: May 2010
Location: PA Poconos
Posts: 723
Default Re: Trying to Identify Some Parts

Maybe I'm nuts, but I don't see any pictures!!!
DD931 is offline   Reply With Quote
Old 05-15-2019, 09:29 AM   #5
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,011
Default Re: Trying to Identify Some Parts

I cannae open the pictures.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote
Old 05-15-2019, 09:38 AM   #6
Afordman31
Senior Member
 
Afordman31's Avatar
 
Join Date: May 2010
Location: Michigan
Posts: 577
Default Re: Trying to Identify Some Parts

Sponsored Links (Register now to hide all advertisements)
No pictures here either!
Afordman31 is offline   Reply With Quote
Old 05-15-2019, 09:55 AM   #7
54vicky
Senior Member
 
54vicky's Avatar
 
Join Date: Dec 2011
Location: Oakville Ontario
Posts: 586
Default Re: Trying to Identify Some Parts

add me to the list of people who do not see pictures
54vicky is offline   Reply With Quote
Old 05-15-2019, 10:36 AM   #8
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: Trying to Identify Some Parts

Same here , no pictures .
Purdy Swoft is offline   Reply With Quote
Old 05-15-2019, 10:50 AM   #9
Vin-tin
Senior Member
 
Vin-tin's Avatar
 
Join Date: Aug 2012
Location: Eastern Pa.
Posts: 543
Default Re: Trying to Identify Some Parts

Yup. No picture here either.
__________________
1929 Coupe
1930 Coupe
1935 Ford 5 window coupe
Vin-tin is offline   Reply With Quote
Old 05-15-2019, 04:08 PM   #10
Jwilli
Senior Member
 
Jwilli's Avatar
 
Join Date: Apr 2014
Location: Kennesaw, Ga
Posts: 511
Default Re: Trying to Identify Some Parts

No pictures.
Jwilli is offline   Reply With Quote
Old 05-15-2019, 05:45 PM   #11
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,472
Default Re: Trying to Identify Some Parts

None over here either!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 05-15-2019, 07:45 PM   #12
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
Default Re: Trying to Identify Some Parts

I saw them earlier but cannot now.

Regards
Bill
BillCNC is offline   Reply With Quote
Old 05-16-2019, 11:56 AM   #13
burner31
Senior Member
 
burner31's Avatar
 
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
Default Re: Trying to Identify Some Parts

Can't see any pictures...try this

Easy way for pics:
Click the "blue post reply" lower left bottom of page, when text box opens, in the top middle of the bar you will see a "paperclip" next to the smiley face, click that, a window will open "manage attachments" click "choose file" then pick your picture, after you picked up to seven pics click the top "upload" on the right hand side of the text box, wait for it to upload.
You must type something, anything into the text box message, scroll down to see "preview post" at bottom of your text box, you should see your message as it will appear when you post, if you like it click "submit reply" to post.
Just make sure the picture file is not to large, if your pics are too big, attached them to an e-mail, don't send it, just copy/save once attached, they're smaller.
__________________
Keith
Shawnee OK
'31 SW 160-B
burner31 is offline   Reply With Quote
Old 05-22-2019, 10:19 AM   #14
Chantruese
Junior Member
 
Join Date: May 2019
Posts: 2
Default Re: Trying to Identify Some Parts

Sorry that the pictures disappeared! No idea why, they still show on the thread when I pop in.

Thanks for the tip on the seat frame and the window shade holders! It's surprisingly difficult to figure out what these things are!
Chantruese is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:53 PM.