|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-15-2018, 12:38 PM | #1 |
Senior Member
Join Date: Jul 2011
Posts: 165
|
Drum Tail Light Socket 1928
Any know or have a picture of how the two wires attach into the early socket assembly. Are the wires bare or do they have bullets on the end of the wires. Thank you for any help on this.
|
07-15-2018, 01:19 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: San Diego, CA
Posts: 1,484
|
Re: Drum Tail Light Socket 1928
There should be copper bullet connectors on the ends of the tail lamp and brake light wires. They simply plug into the bottom of the bakelite socket.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-15-2018, 01:42 PM | #3 |
Senior Member
Join Date: Jul 2011
Posts: 165
|
Re: Drum Tail Light Socket 1928
NOT the wires that connect to the tail light harness but the wires that connect to the SOCKET assembly. They go into two holes in the insulator. Bullet ends, bare wire ends that use a set screw?? How are wires attached inside of the socket assembly? This is for the early DRUM style tail light.
|
07-15-2018, 04:27 PM | #4 |
Senior Member
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
|
Re: Drum Tail Light Socket 1928
They plug into the Bakelite socket on the tailite
|
07-15-2018, 05:19 PM | #5 |
Senior Member
Join Date: Jul 2011
Posts: 165
|
Re: Drum Tail Light Socket 1928
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|