|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-13-2021, 12:52 PM | #1 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
34 Ford front fender tie
I would like to know the proper instllation of the front fender tie?, also air deflector at the bottom of the grill. I have heard that it goes on the top of fenders and also on the back side of fenders? Hope there is a 34 person out there that can help me with this. Thanks Stan
|
09-13-2021, 01:35 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,406
|
Re: 34 Ford front fender tie
Maybe this old discussion will help answer your questions on the front end of your 34.
https://www.fordbarn.com/forum/showt...t+fender+panel This one talks about location of the lower splash shield. https://www.fordbarn.com/forum/showt...t+fender+panel Last edited by Zeke3; 09-13-2021 at 01:37 PM. Reason: Added second link. |
Sponsored Links (Register now to hide all advertisements) |
|
09-13-2021, 03:00 PM | #3 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
Re: 34 Ford front fender tie
Thanks Zeke for the reply that realy helps , As far as the fender tie what I would like to know is. The fender tie cosist of two parts. One is cast and gets painted and mounts on top of front fenders. The other is stamped steel which goes on the back side of fenders. It is held in place with a bolt & nut that runs horazontel thru the fenders which is what ties the fenders together. my question is does the stamped steel part go in between fenders. or on the outside of the fenders? Thanks Stan
|
09-13-2021, 03:16 PM | #4 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: 34 Ford front fender tie
On the outside of the fender flanges as shown below
|
09-13-2021, 03:30 PM | #5 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
Re: 34 Ford front fender tie
David g. Thankyou as they say a picture is worth a THOUSAND WORDS!. Thanks for your help!. Stan
|
09-13-2021, 03:34 PM | #6 | |
Senior Member
Join Date: May 2015
Posts: 8,076
|
Re: 34 Ford front fender tie
Sponsored Links (Register now to hide all advertisements)
Quote:
"On the outside of the fender flanges as shown below" - DavidG
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
09-13-2021, 04:18 PM | #7 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,361
|
Re: 34 Ford front fender tie
1933-1934 Ford Front Fender Tie Clamp. |
09-13-2021, 05:19 PM | #8 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: 34 Ford front fender tie
Trevor,
The fastener on the top was originally a slotted binding head screw, not a hex head screw (bolt), at least in the U.S. |
09-14-2021, 03:51 AM | #9 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,301
|
Re: 34 Ford front fender tie
I think that's the Vintique repop in Trevor's pic.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|