Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-25-2012, 01:51 PM   #1
Firedome
Junior Member
 
Firedome's Avatar
 
Join Date: May 2010
Location: Austin, Texas
Posts: 7
Default 1930 Phaeton floor parts question.

I need to replace the rear seat base and floors in a 30 Standard Phaeton (35B) but all I see in the Macs/Snyders/Mike's catalogs are for the 28/29 model....

So is this the same on the 30/31 models?

If there is a difference, can someone point it out or is this something I can modify these parts fairly easily to fit (via cut & weld)?

Thanks in advance!

-Clif
Firedome is offline   Reply With Quote
Old 04-25-2012, 06:20 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 10,198
Default Re: 1930 Phaeton floor parts question.

With modifications you can use them. Most that I have used do not come with the "hump" and that must be spot-welded in and ordered as a seperate piece. On my website is a picture of a '30 Phaeton that we did with all new lower sheetmetal.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-26-2012, 11:22 AM   #3
Firedome
Junior Member
 
Firedome's Avatar
 
Join Date: May 2010
Location: Austin, Texas
Posts: 7
Default Re: 1930 Phaeton floor parts question.

Sponsored Links (Register now to hide all advertisements)
Thanks Brent! BTW...beautiful job on that Phaeton! Mine is not nearly as far gone as what you started with. Just needs the floor and a completely new top.
Firedome is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:31 PM.