Y-block date code, quick question ?

[dmsfrr]

I'd like a bit of confirmation so the info I'm giving the owner is more than just my opinion, and a link to a website he's never heard of.

I found this block number in a '57 Bird today, EDB-A. Which I believe would be a '55 to '57 292 block, cast in Dearborn. The block number is just behind the generator (not above the oil filter which would indicate a Cleveland block). It's my understanding all '55/'57 T-Bird blocks were cast in Cleveland.
http://ford-y-block.com/Block%20identification.htm


Here's the part I'm not too sure about, the Date Code... 50K:3
I'm fairly sure the 5 signifies 1955
and the K is for October.
but what does the whole date code number mean???

I flipped the photos of the upside down numbers on the block right-side up, for your viewing pleasure.

[Oldmics]

Close - No Cigar !


I"ll post up a picture of the breakdown.


1st digit is the year


2nd position is the month (1-2-3-4-5-6-7-8-9-0-A-B)


3rd position can mean two things depending on if that position uses a number or a letter.


eg-1-2-3-4-and sometimes 5 designates the week of the month


If letters are used in that 3rd spot then - A - Z EXCEPT - an i , decrees the day in the month ALSO SEE ABOUT THE INVERTED LETTERS IN THE ACCOMPANING PICTURES.


Your 3=third shift


Oldmics

[Oldmics]

Info

[Oldmics]

More Info

[scicala]

You da'man Oldmics !


Sal

[dmsfrr]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Oldmics

Close - No Cigar !

Oldmics

Thanks,
Let's see if I got this right.. date code 50K:3
5 = 1955
0 = 10th month of the year = October
K = 11th letter of the alphabet = 10th day of the month because letter "I" is skipped.
and the 3 = 3rd shift.
So this engine block was cast on Oct. 10 of 1955, presumably for a model year '56 vehicle.

Does anyone know if my assumption is correct that original '55/'57 T-Bird engine blocks were only Cleveland castings??? I thought I read that in a T-Bird book but can't recall for sure at the moment.

Originally Posted by scicala

You da'man Oldmics !
Sal

It's true

[Oldmics]

According to the Thunderbird Restoration Manual by Gil Baumgartner -


ALL OF THE THUNDERBIRD ENGINES AND HEADS USED ON THE 55-57 THUNDERBIRDS WERE CAST AT CLEVELAND.


However there is no mention of where the supercharger heads were cast ???


The 57 T Bird heads all had the large casting of ECZ G from Cleveland.


The small ECZ G heads were made at DIF.


I think its interesting to note that no large letter ECZ G heads have been found to be posted.


Oldmics

[dmsfrr]

Originally Posted by scicala

You da'man Oldmics !
Sal

Originally Posted by Oldmics

According to the Thunderbird Restoration Manual by Gil Baumgartner -
ALL OF THE THUNDERBIRD ENGINES AND HEADS USED ON THE 55-57 THUNDERBIRDS WERE CAST AT CLEVELAND.
....
Oldmics

Thanks again, Oldmics
I'm out of town and not near my books.