Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-30-2013, 09:28 AM   #1
modelAtony
Senior Member
 
modelAtony's Avatar
 
Join Date: May 2010
Location: lafayette,la
Posts: 459
Default clutch release bearing and pilot bearing

NEED HELP ! I need to change these bearings. I believe the clutch release bearing is National / federal mogul 2065. but not sure about the pilot bearing. thanks to all in advance. modelAtony Lafayette,la
modelAtony is offline   Reply With Quote
Old 04-30-2013, 10:45 AM   #2
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: clutch release bearing and pilot bearing

The pilot bearing is a 6203, the same as the front bearing on the common long generator.
Tom Wesenberg is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-01-2013, 08:40 AM   #3
modelAtony
Senior Member
 
modelAtony's Avatar
 
Join Date: May 2010
Location: lafayette,la
Posts: 459
Default Re: clutch release bearing and pilot bearing

Sponsored Links (Register now to hide all advertisements)
Thanks for the bearing info . Mr tom.
modelAtony is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:19 AM.