The Ford Barn

gearloose · 02-18-2018, 07:59 AM

How can I tell if I have '31 Pan? What measurement tells me? Is it possible to trim the shield ?

Jim Brierley · 02-18-2018, 11:50 AM

There was an article in the Restorer a while back on this subject, check it out.

Gary WA · 02-18-2018, 02:44 PM

Nov-Dec 2003 Restorer,same art. as above. Measure the rib in pan for height.?

Jim Brierley · 02-19-2018, 01:42 PM

Sponsored Links (Register now to hide all advertisements)

The shield can be trimmed, or left off if you want. Keep the "can" around the pump, it keeps the pump from pumping air.

02-18-2018, 11:50 AM	#2
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,087	Re: Oil pump shield There was an article in the Restorer a while back on this subject, check it out.

02-19-2018, 01:42 PM	#4
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,087	Re: Oil pump shield Sponsored Links (Register now to hide all advertisements) The shield can be trimmed, or left off if you want. Keep the "can" around the pump, it keeps the pump from pumping air.