Go Back   The Ford Barn > The Swap Meet > For Sale > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-24-2017, 07:22 PM   #1
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default 1936 Ford 1/2 Ton Pickup Project/Part Out

City: Los Molinos
State: California
Price: $4500

Have an old Hot Rod from the 1970"s available, one 1936 Ford 1/2 ton pickup roller, frame is without any rust, has 1938 pickup I beam front end and banjo rear end, grill with stainless is almost perfect, has a little rough hood with hood sides, cab is very straight and solid with only a little rocker rust, I have new replacement rockers included, bed is very rust free with a nice straight tail gate with old chromed hinges, however there are no motor trans, will sell this pickup whole or part completely out........
This would make a great Hot Rod starter for only $4500. as is, I have no title but will supply a filled out California DMV Bill of Sale form using the VIN on the front left frame rail, located 125 miles North of Sacramento on Highway 99, call 530-384-1651 or email [email protected] if interested.........
Attached Images
File Type: jpg FORD 1936 PICKUP ROLLER B.jpg (133.2 KB, 254 views)
File Type: jpg FORD 1936 PICKUP ROLLER A.jpg (144.5 KB, 224 views)
File Type: jpg FORD 1936 PICKUP ROLLER C.jpg (124.2 KB, 192 views)
File Type: jpg FORD 1936 PICKUP ROLLER D.jpg (107.3 KB, 205 views)
File Type: jpg FORD 1936 PICKUP ROLLER E.jpg (118.1 KB, 205 views)
File Type: jpg FORD 1936 PICKUP HOOD A.jpg (110.2 KB, 193 views)

Last edited by Aircooled1; 01-30-2017 at 05:14 PM. Reason: Sold the seat....
Aircooled1 is offline   Reply With Quote
Old 02-07-2017, 10:17 AM   #2
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

Still have the 1936 pickup roller, SOLD the grill, price is now $3,995. Bump....
Attached Images
File Type: jpg FORD 1936 PICKUP ROLLER NO GRILL.jpg (139.0 KB, 20 views)
Aircooled1 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-10-2017, 12:55 PM   #3
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

Lowered Price Again to $2,895.00, Grill Sold! Bed Sold! Have an old Hot Rod from the 1970"s available, one 1936 Ford 1/2 ton pickup roller, frame is without any rust, has 1938 pickup I beam front axle and banjo rear axle, grill with stainless is almost perfect, hood with hood sides are a bit rough, cab is very straight and solid with only a little rocker rust, I have new replacement rockers included, bed is very rust free with a nice straight tail gate with old chrome hinges, steering box column and wheel are included, hydraulic brakes backing plates are included front/rear, hydraulic brake pedal assembly is also included, , Will Sell This Pickup Whole, or Part Completely Out.......Cab with Doors for $1500......Bed with Tail Gate for $1200. (Pending Bill Gozzo).........Steering Column, drop, box, and steering wheel, horn button for $200........Bare Frame for $1000..........Rolling Frame with 1938 front/rear axles, hydraulic brake plates, pedals, and all four wheels for $1500.........
This would make a great Hot Rod starter for only $2895. recently lowered down from $4500. I have no title but will supply a filled out California DMV Bill of Sale form using the VIN on the front left frame rail, located 125 miles North of Sacramento on Highway 99, call or email if interested........ 1935 1936 1938 1939 1940 1941
Attached Images
File Type: jpg FORD 1936 PICKUP ROLLER A.jpg (111.9 KB, 32 views)
File Type: jpg FORD 1936 PICKUP ROLLER B.jpg (114.5 KB, 34 views)
File Type: jpg FORD 1936 PICKUP ROLLER C.jpg (133.3 KB, 33 views)
File Type: jpg FORD 1936 PICKUP ROLLER D.jpg (109.2 KB, 39 views)
Aircooled1 is offline   Reply With Quote
Old 05-15-2017, 08:45 AM   #4
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

Lowered Price Again to $2,500.00, Grill Sold! Bed Sold! Cab has been switched out for a 1937 1/2 ton cab.....Have an old Hot Rod from the 1970"s available, one 1936 Ford 1/2 ton pickup roller, frame is with one rust hole in the right rear kick up, has 1940 pickup I beam front axle and 1940 banjo rear axle, cab is fairly straight and solid with only some rocker rust , Will Only Sell This Pickup Whole............
This would make a great Hot Rod starter for only $2500. recently lowered down from $4500. I have a clear California title in my name on a non-op registration, matching the VIN on the front left frame rail, located 125 miles North of Sacramento on Highway 99, call or email if interested........ 1935 1936 1938 1939 1940 1941
Attached Images
File Type: jpg FORD 1037 PICKUP ROLLER A.jpg (142.2 KB, 24 views)
File Type: jpg FORD 1037 PICKUP ROLLER B.jpg (139.1 KB, 24 views)
File Type: jpg FORD 1037 PICKUP ROLLER C.jpg (135.3 KB, 22 views)
File Type: jpg FORD 1037 PICKUP ROLLER D.jpg (130.6 KB, 23 views)
File Type: jpg FORD 1037 PICKUP ROLLER E.jpg (98.5 KB, 25 views)
File Type: jpg FORD 1037 PICKUP ROLLER F.jpg (109.2 KB, 24 views)
File Type: jpg FORD 1037 PICKUP ROLLER G.jpg (101.4 KB, 24 views)
File Type: jpg FORD 1037 PICKUP ROLLER H.jpg (88.0 KB, 24 views)
File Type: jpg FORD 1037 PICKUP ROLLER I.jpg (140.3 KB, 30 views)
Aircooled1 is offline   Reply With Quote
Old 10-15-2017, 11:04 AM   #5
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

Have the brown 1936 cab on a rust free 1936 pickup frame, very clean front and rear axle assemblies from a restored 1940 coupe.......$3500. pick up here 125 miles North of Sacramento on highway 99, call 530-384-1651 or email me............................... [email protected]
Attached Images
File Type: jpg FORD 1936 PICKUP ROLLER E.jpg (62.9 KB, 24 views)
File Type: jpg FORD 1936 PICKUP ROLLER A.jpg (95.6 KB, 26 views)
File Type: jpg FORD 1936 PICKUP ROLLER B.jpg (130.9 KB, 21 views)
File Type: jpg FORD 1936 PICKUP ROLLER C.jpg (107.3 KB, 18 views)
File Type: jpg FORD 1936 PICKUP ROLLER D.jpg (115.5 KB, 19 views)
File Type: jpg FORD 1936 PICKUP ROLLER F.jpg (102.3 KB, 22 views)
File Type: jpg FORD 1936 PICKUP ROLLER G.jpg (123.1 KB, 26 views)
File Type: jpg FORD 1936 PICKUP ROLLER H.jpg (119.1 KB, 25 views)
File Type: jpg FORD 1936 PICKUP ROLLER I.jpg (119.3 KB, 21 views)
File Type: jpg FORD 1936 PICKUP ROLLER J.jpg (104.3 KB, 20 views)
Aircooled1 is offline   Reply With Quote
Old 02-21-2018, 11:31 PM   #6
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

Sponsored Links (Register now to hide all advertisements)
We are now down to the rolling chassis, a straight solid 1936 pickup frame with no rust holing $1,000.....I beam front axle assembly complete with hydraulic brakes drum to drum from a restored 1940 coupe $400.... Banjo 4:11 gears rear axle assembly complete drum to drum with hydraulic brakes from the same restored 1940 coupe $600....Four 1950 Mercury wheels W/tires $150..... Three 1936 Ford truck radiators $150. each........Pick up all here 125 miles North of Sacramento on highway 99 East for $2,000.
Attached Images
File Type: jpg FORD 1936 ROLLING CHASSIS C.jpg (124.4 KB, 19 views)
File Type: jpg FORD 1936 ROLLING CHASSIS A.jpg (150.3 KB, 16 views)
File Type: jpg FORD 1936 ROLLING CHASSIS B.jpg (139.9 KB, 18 views)
File Type: jpg FORD 1936 ROLLING CHASSIS D.jpg (126.0 KB, 17 views)
File Type: jpg FORD 1936 ROLLING CHASSIS E.jpg (129.3 KB, 15 views)
File Type: jpg FORD 1936 TRUCK 3 RADIATORS A.jpg (80.1 KB, 18 views)
File Type: jpg FORD 1936 TRUCK 3 RADIATORS B.jpg (81.0 KB, 19 views)
Aircooled1 is offline   Reply With Quote
Old 06-01-2018, 09:36 AM   #7
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

Bare frame is still available for only $700., radiators still available too....Bump...
Attached Images
File Type: jpg FORD 1936 PICKUP BARE FRAME.jpg (130.1 KB, 10 views)
File Type: jpg FORD 1936 PICKUP BARE FRAME B.jpg (160.6 KB, 10 views)
File Type: jpg FORD 1936 PICKUP BARE FRAME C.jpg (147.2 KB, 8 views)
Aircooled1 is offline   Reply With Quote
Old 06-26-2018, 08:23 AM   #8
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

All I have left is a complete 1940 front axle assembly with hydraulic brakes $400., another one that was dropped 3 to 4 inches with no brakes $500., a bare axle beam w/wishbone $125., and 3 radiators $100. each.... Bump...
Aircooled1 is offline   Reply With Quote
Old 12-03-2018, 01:48 PM   #9
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 832
Default Re: 1936 Ford 1/2 Ton Pickup Project/Part Out

All I have left is a complete 1940 front axle assembly with hydraulic brakes $400., another 1940 axle that was dropped 3 to 4 inches, complete with no brakes $500., a bare 1940 axle beam w/wishbone $125., and 3 radiators $100. each.... Bump...
Aircooled1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:36 AM.