Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-23-2020, 11:47 AM   #1
dirt t
Senior Member
 
Join Date: May 2010
Location: Kingman,AZ
Posts: 124
Default 1930 ccpu

Could some one advise me how to get roller on window regulator into the channel on the window?
Thank you for your time.
Terry aka dirt t
dirt t is offline   Reply With Quote
Old 01-23-2020, 06:17 PM   #2
Marcus
Senior Member
 
Marcus's Avatar
 
Join Date: May 2010
Location: Walnut Grove, Mississippi
Posts: 605
Default Re: 1930 ccpu

Terry : on my 29 (l know yours is a 30, but doubt there is much difference): I simply roll the window all the way down, grasp the roller and guide it back into the channel when I slowly roll the window up. Hopefully this answers your question, unless I misunderstood.
__________________
WARM REGARDS, MARCUS
Marcus is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-26-2020, 03:41 PM   #3
dirt t
Senior Member
 
Join Date: May 2010
Location: Kingman,AZ
Posts: 124
Default Re: 1930 ccpu

I ended up removing regulator mounting screws ,connected it from the window and reinstalled regulator.
Thank you for your reply.
Terry aka dirt t
dirt t is offline   Reply With Quote
Old 01-26-2020, 04:41 PM   #4
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: 1930 ccpu

Sponsored Links (Register now to hide all advertisements)
That's the way that I do mine !
Purdy Swoft is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:35 PM.