|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-03-2015, 08:14 AM | #1 |
Member
Join Date: Nov 2013
Location: Anderson, IN
Posts: 44
|
Banjo 6 or 10 spline???
Hello Fellas,
Ive got a 46 Super Deluxe and im ordering all parts needed to do an open drive conversion. My question is do I need a 6 or 10 spline yoke? I realize I could pull the old one off to check but I would rather have all parts gathered before I tear into it. Any help is appreciated. Also someone previous to me has converted it over to wide 5 hubs/drums but I believe it still has the original 46 rear (not sure if the year of rear would make a difference in the yoke spline count?). What years or applications were the 6 or 10 splines used or was there any rhyme or reason to the different uses? Thanks Dennis Last edited by Flatkid8; 04-03-2015 at 08:22 AM. |
04-03-2015, 08:42 AM | #2 |
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,769
|
Re: Banjo 6 or 10 spline???
10 spline was 33 thru about 37. Look at your torque tube. If it has a lube fitting in the middle, it is a 6 spline. I am confident you have a 6 spline.
Last edited by Andy; 04-03-2015 at 09:01 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-03-2015, 09:56 AM | #3 | |
Member
Join Date: Nov 2013
Location: Anderson, IN
Posts: 44
|
Re: Banjo 6 or 10 spline???
Sponsored Links (Register now to hide all advertisements)
Quote:
It does have a grease zerk in the middle of the torque tube...sounds like ive likely got a 6 spline. Thanks a million! Dennis |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|