|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-26-2019, 07:15 AM | #21 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,825
|
Re: Shop led lighting
I scrapped all the 4 ft fixtures and put up the same number (as tubes) of those 4 ft linkable LED lights; but in single bulb strips closer spaced than the two bulb fluorescent fixtures had been. No wiring and gave me a chance to paint the ceiling as I went.
I used the lights from ebay that come in "six packs"; just under $10 per light (bought an extra box for matching spares in case of failure). Can't believe the improvement; brighter and more even. |
07-26-2019, 12:18 PM | #22 |
Senior Member
Join Date: Mar 2011
Location: upstate NY
Posts: 478
|
Re: Shop led lighting
Your ceiling height probably would not need high bay fixtures, they are for warehouse use with tall ceilings. To limit the need for extra wiring I would go for a one to one swap. Go on line to 1000bulbs.com or e-conolight.com. there's a lot of choices and reasonable prices. They will even make recommendation based on your dimensions and height.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-26-2019, 04:19 PM | #23 |
Senior Member
Join Date: Jan 2012
Location: New Jersey
Posts: 1,423
|
Re: Shop led lighting
Guys, he's not talking about 4' fluorescent tubes. He's talking about Metal Halide.
I mentioned 240 volts because some people wire them that way because they'll run at half the amperage as 120 volt would. The transformers and related parts MUST be left out of the wiring. The socket is wired directly with, let's say for arguments sake, 120 volts. You screw in the LED and you're done! They make them for regular base, like a standard light bulb or the larger mogul base. I've installed tons of these for my customers from parking lots to warehouses to walk in freezers etc. Look em up on line, they're excellent |
07-26-2019, 04:50 PM | #24 |
Senior Member
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
|
Re: Shop led lighting
I did the same even the Costco part. They are great. I would forget those old fashioned round lights.
|
07-26-2019, 05:07 PM | #25 |
Senior Member
Join Date: Apr 2015
Location: Coastal Georgia
Posts: 131
|
Re: Shop led lighting
Sams Club has a 4 ft LED shop light on sale for$22.98, $7 off the regular price of $29.98. I’ve replaced nearly all of my fluorescent light with LED’s. They are great!
John |
07-26-2019, 05:50 PM | #26 |
Senior Member
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
|
Re: Shop led lighting
Sponsored Links (Register now to hide all advertisements)
|
07-26-2019, 09:06 PM | #27 | |
Junior Member
Join Date: Jun 2019
Location: New Hampton IA
Posts: 16
|
Re: Shop led lighting
Quote:
I was also looking at lights at bees lighting if you jump over to the sister forum garage journal they have a entire section to garage lighting. |
|
07-26-2019, 10:39 PM | #28 | |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: Shop led lighting
Quote:
Ah okay that makes sense. Amps being the operable word of power usage. I understand sometimes 240 can use less energy then a 120 unit, like lets say a ac wall unit. I would think leaving the ballast in the system would defeat the biggest reason for leds. Power usage. Seems like wasted energy. I guess still better. (not what you are saying, just previous posts) . Last edited by Tinker; 07-26-2019 at 11:08 PM. |
|
07-27-2019, 07:57 AM | #29 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,422
|
Re: Shop led lighting
The helicopter shop I work out of has the HID metal halide type bulbs since the hangar has 18 foot ceilings to be able to lift helicopters off of the trailers. They last around 20,000 hours but we only use them when the weather is dark or on the few overtime occasions that arise. I use a vertical mast hydraulic bucket lift on the rare occasion of having to replace a bulb. I may have to change over to LED if they quit making the HID types and if I do, I'll get rid of the big clunky ballasts and wire them direct. They last longer and use less energy but they are kind of expensive. I've been slowly replacing the fluorescent bulbs with LED in the office & overhaul shop fixtures depending on use. It's nice to get rid of the ballasts. They were a pita to replace when they went bad. LEDs light right up too. There is no waiting around on worn out ballasts with the LED types.
|
07-27-2019, 08:10 AM | #30 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Shop led lighting
Got to weigh in here . I hate LEDs , converted my entire shop a few years back. Have
1 flurosent (sp?) above my desk in main shop ( you can buy the bulbs now , for a while you couldnt). The leds ( yes i bought the brighter bulbs ) are dim compared to the old ones. I understand the energy issue but could care less , thats like buying gasoline , are you really driving 19 miles to save 10 cents per gallon and then buying 9 gallon ???? I have friends that do..... On a role this morning......... |
07-27-2019, 04:26 PM | #31 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,422
|
Re: Shop led lighting
The price on the 48 inch fluorescents are getting up there in price too. The ballasts that are available now are crap. All of our fixtures had 4 bulbs per unit with 2 ballasts and if one went out the other of the pair went out too. Most of them are down to just two bulbs per unit since they are bright enough that way. It's saved on bulbs. The last box of fluorescents was up there in price and they aren't as easy to source locally as they used to be.
I guess that's one thing about getting old, you know your old after well over half the things you used to use daily are obsolete and no longer available. |
07-27-2019, 04:44 PM | #32 | |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Shop led lighting
Quote:
|
|
07-27-2019, 05:04 PM | #33 |
Senior Member
Join Date: Jan 2014
Location: Holmen,Wisconsin
Posts: 783
|
Re: Shop led lighting
Guys,
Thanks again for all the responses and information. My need for high bay lights is because my attached garage/shop is also home to an airplane. On the hangar side the ceilings are high (see pic). I want round fixtures that can hang from existing hooks, am looking at the UFO product mentioned here and elsewhere. I have had some recommendations of 200 - 300 watts and 5000 - 6000K. Any additional comments/recommendations most welcome.
__________________
I went, I saw, I bought the T shirt 51 Ford Deluxe Tudor 32 Ford roadster 39 Mercury Towncar |
07-28-2019, 12:41 PM | #34 | |
Senior Member
Join Date: May 2010
Location: Huntsville Al
Posts: 1,526
|
Re: Shop led lighting
Quote:
I agree. LEDs are easily twice as bright as florescents. They make them in different light wave colors. Might want to try another bulb hue.
__________________
Matt 24:36-41 |
|
07-28-2019, 01:07 PM | #35 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: Shop led lighting
Years ago, we started our shop with fluorescent lighting. Later, mercury vapor replaced that, and now we have all LED fixtures. Better lighting and a 45% reduction in the power bill. The power company also gave us a rebate on the cost. As a result, I also converted lighting in my home and saved a like amount. DON'T WAIT!
|
07-28-2019, 02:40 PM | #36 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: Shop led lighting
All this talk of LED’s I went down and got a couple yesterday to replace my old non working 8’ fluorescent ceiling lights. Looks so good I’m going back for two more! Put it off for way too long.
|
07-28-2019, 04:35 PM | #37 |
Senior Member
Join Date: May 2010
Location: Daytona Beach, Fl & Spencer, W. Va,
Posts: 4,442
|
Re: Shop led lighting
My garage had 22 standard 8ft fluorescent fixtures, and dad's garage here had the 8ft high output fixtures with the different ends on the bulbs.
I decided to convert all of mine to LED, and since I already had the fixtures mounted, I opted for the conversion bulbs. I got them from Amazon. They were VERY easy to do. All you do is hook them straight up to 120V. Clip the wires off the balast, and hook the black 120V wire to one side of the bulb, and the white to the other... and you're DONE. The LED bulbs do a much more efficient job at converting electricity to light, so they are a LOT brighter, and put off a lot less heat. They also come on no matter how cold it is! Instant full brightness! At dad's the fixtures were further apart and higher up, so I used the bulbs that have TWO rows of LED's. FAR brighter in the garage now! Can't say enough good things about the LED lighting... Nothing short of a complete revolution in lighting! As for 'color'... 5k bulbs are white with no blue. 6k bulbs are daylight with a tinge of blue, and anything above 6k is a little bluish. The lower the number, the more yellow, and the higher the more blue. One more thing... You can get bulbs with clear or frosted covers. With the clear covers, you can see each individual LED, while the frosted covers look more like a conventional fluorescent. I have some of both, and can see no difference in light output, but you do not want the clear covered bulbs where they are directly in your vision. The frosted covers are a LOT easier on the eyes. I wouldn't use the clear covers unless the bulbs were far overhead... and the frosted covers would still be fine there. Good Luck!
__________________
Mike Jr. here. I get on here every few months to check messages, and look through his almost 500 saved messages for information on the '29 and '34 I still have. A lot of very nice people on here. He truly enjoyed Ford Barn. |
07-28-2019, 07:27 PM | #38 |
Senior Member
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
|
Re: Shop led lighting
We'll have to agree to disagree on that one. My LEDs are MUCH brighter than any fluorescents. At least double the lumens. You musta got some crummy LEDs because the newer ones are super bright and a much whiter light.
|
07-29-2019, 05:26 AM | #39 |
Senior Member
Join Date: May 2010
Location: Georgia
Posts: 611
|
Re: Shop led lighting
I used Greenlight depot in Ga free shipping.Fixing to replace 9 8ft but did 18 4ft
|
07-29-2019, 09:42 AM | #40 |
Senior Member
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,664
|
Re: Shop led lighting
When you use the led's will your garage door openers work from the auto's remotes? When led's came out some of them put out a frequency that blocked the remote's from working.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|