40 conv.w/strip channel - The Ford Barn

		The Ford Barn > General Discussion > Early V8 (1932-53)
40 conv.w/strip channel

Sponsored Links (Register now to hide all advertisements)

Prev

Previous Post

Next Post

Next

10-23-2017, 10:40 AM	#1
Milt/Las Vegas Senior Member Join Date: May 2010 Location: North Las Vegas,Nv/Rainier,Or Posts: 450	40 conv.w/strip channel The upper door w/strip channels mounted on the top irons appear to be too long by an 1/8 of an inch or so and no provision for any kind of a seal.If I elongated the screw holes I might be able to move the channels back enough.I should not have to do either.The forward screw hole in the channels do not have a matching hole in the top iron. __________________ Milt/Las Vegas

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 01:12 PM.