|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-06-2018, 07:04 PM | #1 |
Senior Member
Join Date: May 2010
Location: Lakewood, CO
Posts: 413
|
'32 Roadster w/s frame
I bought a used aftermarket '32 Roadster windshield frame, I then ordered all the mounting hardware. The w/s frame mounting stud is 3/8" on both ends, the threads in my w/s frame are 5/16". Did I get the wrong stud or are the threads in the frame wrong?
|
08-06-2018, 08:40 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
|
Re: '32 Roadster w/s frame
The threads in the windshield frame are incorrect. The original phaeton/roadster windshield frame mounting studs for '32 were 3/8" in diameter on both ends. The studs for '33-'36 phaeton/roadster windshield frames were 3/8" on the outer end and 5/16" on the end attached to the frame.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-06-2018, 09:08 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 247
|
Re: '32 Roadster w/s frame
What brand of windshield frame is it?
|
08-06-2018, 09:23 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 4,430
|
Re: '32 Roadster w/s frame
Speedway has listed in their catalogue a stud that is 5/16 fine on one end and 3/8th fine on the other. Says it is made for their repro frames.
|
08-06-2018, 10:13 PM | #5 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
|
Re: '32 Roadster w/s frame
For those who care, the reproduction '32 w/s frames from N/C Industries in Pennsylvania have the original 3/8 threads.
|
08-07-2018, 08:06 AM | #6 |
Senior Member
Join Date: May 2010
Location: Lakewood, CO
Posts: 413
|
Re: '32 Roadster w/s frame
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|