The Ford Barn

OHV DeLuxe · 08-01-2016, 04:37 PM

I have a few old special rods with insert bearings. They are 2" inner diameter and the only markings are 2891-010.
Anyone with bearing catalogues who can tell what this is for? Thanks.

johnneilson · 08-01-2016, 05:25 PM

if you can provide the bore size in the block you can start to do a look up in the catalogs.
unless it is a custom made, it should follow the manufacturers (auto and diesel)

John

Mitch//pa · 08-01-2016, 05:56 PM

Mcquay Norris
1940 Ford V8-60 rods

Bob C · 08-01-2016, 07:32 PM

Sponsored Links (Register now to hide all advertisements)

I came up with 37-39 Ford 60 HP front and center main. This is from
a 1940 Mcquay Norris catalog.

Bob

08-01-2016, 05:25 PM	#2
johnneilson Senior Member Join Date: Jun 2010 Location: 34.22 N 118.36 W Posts: 1,056	Re: Help with id on bearing shells. if you can provide the bore size in the block you can start to do a look up in the catalogs. unless it is a custom made, it should follow the manufacturers (auto and diesel) John __________________ As Carroll Smith wrote; All Failures are Human in Origin.

08-01-2016, 05:56 PM	#3
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Help with id on bearing shells. Mcquay Norris 1940 Ford V8-60 rods

08-01-2016, 07:32 PM	#4
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,753	Re: Help with id on bearing shells. Sponsored Links (Register now to hide all advertisements) I came up with 37-39 Ford 60 HP front and center main. This is from a 1940 Mcquay Norris catalog. Bob