|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-17-2021, 09:35 PM | #1 |
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,099
|
1933 1934 ford flathead banjo rearend 3:54 ratio
City:
Marietta
State:
GA
Price:
Sold
FOR SALE: Complete rear end from a 1933-1934 Ford Flathead. Includes driveshaft, torque tube, radius rods, and partial rear spring pack. No brakes though. Banjo housing was pulled apart prior to my purchase by the seller who acquired from a 1933-1934 Ford collector to inspect ring & pinion so would need new gasket shims installed. Desirable 3:54 ring & pinion. Can be used in a 1932 Ford if you shorten the driveshaft and torque tube. 1933-1934 is same rearend as late 1932 Ford with the scalloped housing and supported pinion bearing unlike the round early 1932 Ford which was like a model A. 1933-1934 radius rods mount at a different angle than the 1932 Ford also.
Sold Local pickup only near Atlanta, GA. CASH only. cannot get pics to load. I also have a classified ad on the HAMB and pics can be seen there or via this link https://www.jalopyjournal.com/forum/...#post-14229825
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS Last edited by Strick; 10-30-2021 at 05:02 PM. |
10-22-2021, 08:30 PM | #2 |
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,099
|
Re: 1933 1934 ford flathead banjo rearend 3:54 ratio
Sponsored Links (Register now to hide all advertisements)
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|