|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-08-2019, 08:10 PM | #1 |
Senior Member
Join Date: Dec 2015
Location: Oswego, NY
Posts: 119
|
37 bumper questions
My 37 club cab is coming together. Are the bumper bracket bolts S2 finish? Also , the bumper bolts are 7/16 fine threads. the originals have a 5/8 inch wrench size nut. The repros have an 11/16 wrench size nut. Is there any place to purchase the correct size nut? These are minor details, but I would to try to be correct. Thanks , Ernie
|
01-08-2019, 10:20 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,070
|
Re: 37 bumper questions
Try Roy Nacewicz at fordbolts.com for the nuts. The bumper bracket-to-frame fasteners originally had an S-2 finish. The nuts and lock washers for the bumper guards and stainless-steel-capped bumper bolts had an S-4 finish.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-08-2019, 11:51 PM | #3 |
Senior Member
Join Date: Jul 2014
Location: Tucson, AZ
Posts: 331
|
Re: 37 bumper questions
Attached is a pdf listing all the hardware associated with my 37 Sedan Delivery bumpers. I believe the front bumper is common to all the passenger cars.
I did buy some of the bolts, etc. from Roy. He is good, wealth of knowledge and expertise. I can provide pics of the bumpers, brackets and hardware if interested. gregg |
01-09-2019, 06:03 AM | #4 |
Senior Member
Join Date: Dec 2015
Location: Oswego, NY
Posts: 119
|
Re: 37 bumper questions
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|