|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-27-2013, 08:13 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 138
|
Identifying 40 Ford PU Ornament
I'll be purchasing a new 40PU hood ornament. But, I want to get the correct one. I have two old ornaments hanging on the garage wall and I am wondering which type fits the 40 pickup (both appear to be the standard style)?
The flat service (where the handle connects) extends 2 1/4" and has only one screw hole on one of the ornaments. The other ornament has a flat space of 3 1/4" and has two screw holes. Many folks are selling one online that they say fits 40 standard or pickup. How can that be? Need your thoughts on this one Barners. Thanks. Last edited by Kentf1003; 08-27-2013 at 08:18 PM. Reason: detail change |
08-27-2013, 09:23 PM | #2 |
Senior Member
Join Date: Jul 2010
Location: UPSTATESC
Posts: 669
|
Re: Identifying 40 Ford PU Ornament
if original ford partlook on the back for the part number. O1A--auto, O1C commercial/pick-up
|
Sponsored Links (Register now to hide all advertisements) |
|
08-28-2013, 07:00 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 138
|
Re: Identifying 40 Ford PU Ornament
Thanks Alan. I looked, and sure enough the longer one with two holes is for the commercial. That means that those advertising their ornament as fitting both models are not being accurate with the public. Thanks so much.
|
08-28-2013, 09:06 AM | #4 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: Identifying 40 Ford PU Ornament
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|