The Ford Barn

forever4 · 11-22-2016, 06:33 PM

Quote:

Originally Posted by DaWizard

Well, I tell ya folks, I have over $14,000.00 worth of Snap-On tools in my box and don't have one of these. So, if it's not too much trouble, would you please add me to the list of those wanting one.

If you are fixated on Snap-On brand tools, they also made a 13/32 socket for this purpose. You can find it on eBay.

Mitch//pa · 11-22-2016, 07:01 PM

Quote:

Originally Posted by DaWizard

Well, I tell ya folks, I have over $14,000.00 worth of Snap-On tools in my box and don't have one of these. So, if it's not too much trouble, would you please add me to the list of those wanting one.

[email protected]

You notify me with email, I will give you the $30.00 for the socket and shipping to your email or PayPal account and you can ship one to me.

Thanks for the making of a quality product.

14,000 worth of snap on tools // thats a few socket sets

and maybe a screw rodger

DaWizard · 11-22-2016, 07:32 PM

Actually, the day the tools were officially paid for, the driver disappeared never to return. Musta retired on the purchasing of my tools from him. That worth was also in the '80s since in 1990 I stopped wrenching on motorcycles and cars and went to work for UPRR where I have since retired.

Now, I would rather support the enthusiast rather than the huge corporation, my order for the socket still stands.

haag1332 · 11-22-2016, 07:57 PM

Thank you for your support forever4. Really, geez. Honestly, thanks to all the rest of you for your patience and support.

Not even sure what to say. Guess everyone should go to ebay and I will throw the rest of what I am working on in the scrap pile.

Really though, Thank you guys!!

Bill Jr.

Y-Blockhead · 11-22-2016, 08:10 PM

Quote:

Originally Posted by haag1332

Thank you for your support forever4. Really, geez. Honestly, thanks to all the rest of you for your patience and support.

Not even sure what to say. Guess everyone should go to ebay and I will throw the rest of what I am working on in the scrap pile.

Really though, Thank you guys!!

Bill Jr.

Haha, don't do that!! Not everyone can say they have a genuine Haag 13/32" socket.

haag1332 · 11-22-2016, 08:23 PM

Sponsored Links (Register now to hide all advertisements)

I would love to send one to forever4 to see if I could gain his support with the quality of my socket, but I just can't afford to give any away at this point since I am already in a loss position on this project. But oh well.

Then again, Christmas is coming, maybe I will be in the giving mood during the celebration of our saviors birth in about a month.

Bill Jr.

DaWizard · 11-22-2016, 08:26 PM

Hey, if you didn't know, I am thrilled with all the Snap-on tools I do have, but I ain't chasin no trucks to only order and hope they get back to me with what I need.

Keep up the good work Jr., I still want one!

haag1332 · 11-23-2016, 12:28 AM

Ummmm Check your PM's DaWizard, you have been placed on the list, and an explanation of where things stand with regard to this project.

Hope all is well, and thank you for your interest.

Bill Jr.

HoarseWhisperer · 11-23-2016, 02:33 PM

Just received my Haag 13/32" deep well socket and tried it out on an old Oct 28-Dec 28 Holley. The worn, rounded nut came right off.

Very pleased with the quality and service. Valuable tool for the those of us that like to work on Zenith carbs.

Thanks for your contribution to the hobby, Bill.

haag1332 · 11-23-2016, 05:58 PM

Glad it worked for you Hoarse. I would have expected nothing less since I have a lot of time wrapped up in designing, testing, and making these things with specialty made tooling in order to hold tight tolerances.

Thank you for the review,

Bill Jr.

Bill in SoCal · 11-23-2016, 07:47 PM

Bill, The two sockets I ordered arrived today, beautiful work and cleaver packaging. After reviewing this post - it hardly seems enough to say thanks for your time and effort. This grew into a large project for you - Thank You. Bill

haag1332 · 11-23-2016, 08:17 PM

Thank you Bill, I am sure you will be pleased with them.

Bill

P.S. · 11-24-2016, 12:03 PM

Every one of these posts just makes we, whose number has not yet come up, more and more anxious!

C26Pinelake · 11-24-2016, 01:07 PM

Quote:

Originally Posted by P.S.

Every one of these posts just makes we, whose number has not yet come up, more and more anxious!

How often in a lifetime will you use it, maybe 2 or 3 times if you are not a rebuilder? I. Can see. No need to get anxious. Wayne

haag1332 · 11-29-2016, 12:34 AM

Guys seriously, lol

Please read the instructions when I send the ordering notices.

Once again I send a bunch of notices, then guys order and don't include their Ford Barn name, and I have no idea whether they are legit or not with respect to all the original interested parties on here.

When I send you notice through FB Mail or PM and you don't include the FB name on the order, I have no idea who you are since I do not see your email address on FB when I send the notice. And if I send you a PM and you don't include your FB name on the order, I have no idea once again who you are.

I spent considerable time tonight narrowing (4) people down by geographical location with there FB info and then the shipping address provided.

I think my instructions in the notice are pretty simple. I keep reviewing them to see what I am missing, but I think it is pretty clear.

Anyway, please read the notice carefully when you get it since it would make things much easier on my end to make sure the original interested parties get their sockets, and not a couple of johnny come lately's slip in ahead.

On another note, I have not had a bad review yet of the socket from anyone who has used it so I guess we are doing a good job.

I still have few people who have not responded to the notices, even after numerous attempts sending PM's as well as sending to email through FB, and email sent to my personal email, [email protected]. I am planning to put a list of these FB names on here in the near future since some of the members here may be friends with them or have some idea how I can contact them in case the contact information here on FB has changed, or they are no longer on FB. If they are no longer interested it's fine, but I would like to know so I can distribute the sockets I am holding for them to other interested parties who are eager to aquire them.

Hope you are all well,

Bill

Fullraceflathead · 11-29-2016, 11:40 AM

I received mine and the Quality is Great!
FYI I'm a Quality Control Inspector and Reverse Engineer.

Pilotdave · 11-30-2016, 04:25 PM

Wahoo! Mine arrived today - they look really nice. Nice touch with the engraving. I'll try them in the shop shortly. Bill - thanks for this contribution to our hobby.

Dave

Tom Wesenberg · 11-30-2016, 06:29 PM

It's a very well built socket, and I'm glad the stamping was added. I haven't had a chance to use mine yet, but may have to find a carb just to try it out.

haag1332 · 11-30-2016, 06:38 PM

Thank you for the input Tom. I am confident you will be even happier once you use it. So far nothing but positive reports from everyone.

Bill Jr.

Pilotdave · 12-01-2016, 12:05 PM

Put mine to work this morning - worked perfectly on a spare carb. I'm another happy camper!!

11-22-2016, 07:32 PM	#403
DaWizard BANNED Join Date: Nov 2016 Location: Dizzyland Ca Posts: 332	Re: carburetor 13/32 deep well socket Actually, the day the tools were officially paid for, the driver disappeared never to return. Musta retired on the purchasing of my tools from him. That worth was also in the '80s since in 1990 I stopped wrenching on motorcycles and cars and went to work for UPRR where I have since retired. Now, I would rather support the enthusiast rather than the huge corporation, my order for the socket still stands. __________________ New owner of '28 Tudor Previously owned; '30 Sport Coupe '28 left brake ccPickup '31 SW Town Sedan '28 AA Stake Bed '30 Cabriolet '42 Super Deluxe 4door Sedan "If it don't fit, get a bigger hammer. If it breaks...... ya needed a new one anyway!!" Doing a good job here is like wetting your pants in a dark suit. It gives you a warm feeling, but nobody notices. Never pass up a bathroom Never neglect an erection Never trust a fart

11-22-2016, 07:57 PM	#404
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Thank you for your support forever4. Really, geez. Honestly, thanks to all the rest of you for your patience and support. Not even sure what to say. Guess everyone should go to ebay and I will throw the rest of what I am working on in the scrap pile. Really though, Thank you guys!! Bill Jr.

11-22-2016, 08:23 PM	#406
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Sponsored Links (Register now to hide all advertisements) I would love to send one to forever4 to see if I could gain his support with the quality of my socket, but I just can't afford to give any away at this point since I am already in a loss position on this project. But oh well. Then again, Christmas is coming, maybe I will be in the giving mood during the celebration of our saviors birth in about a month. Bill Jr.

11-22-2016, 08:26 PM	#407
DaWizard BANNED Join Date: Nov 2016 Location: Dizzyland Ca Posts: 332	Re: carburetor 13/32 deep well socket Hey, if you didn't know, I am thrilled with all the Snap-on tools I do have, but I ain't chasin no trucks to only order and hope they get back to me with what I need. Keep up the good work Jr., I still want one! __________________ New owner of '28 Tudor Previously owned; '30 Sport Coupe '28 left brake ccPickup '31 SW Town Sedan '28 AA Stake Bed '30 Cabriolet '42 Super Deluxe 4door Sedan "If it don't fit, get a bigger hammer. If it breaks...... ya needed a new one anyway!!" Doing a good job here is like wetting your pants in a dark suit. It gives you a warm feeling, but nobody notices. Never pass up a bathroom Never neglect an erection Never trust a fart

11-23-2016, 12:28 AM	#408
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Ummmm Check your PM's DaWizard, you have been placed on the list, and an explanation of where things stand with regard to this project. Hope all is well, and thank you for your interest. Bill Jr.

11-23-2016, 02:33 PM	#409
HoarseWhisperer Senior Member Join Date: May 2010 Location: Ontario, Canada Posts: 1,470	Re: carburetor 13/32 deep well socket Just received my Haag 13/32" deep well socket and tried it out on an old Oct 28-Dec 28 Holley. The worn, rounded nut came right off. Very pleased with the quality and service. Valuable tool for the those of us that like to work on Zenith carbs. Thanks for your contribution to the hobby, Bill. __________________ I know a lot of things; I just can't remember them all. 1928 CCPU 82-A 1931 Roadster 40-B Dlx (Canadian)

11-23-2016, 05:58 PM	#410
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Glad it worked for you Hoarse. I would have expected nothing less since I have a lot of time wrapped up in designing, testing, and making these things with specialty made tooling in order to hold tight tolerances. Thank you for the review, Bill Jr.

11-23-2016, 07:47 PM	#411
Bill in SoCal Senior Member Join Date: May 2010 Location: Claremont, CA 91711 Posts: 244	Re: carburetor 13/32 deep well socket Bill, The two sockets I ordered arrived today, beautiful work and cleaver packaging. After reviewing this post - it hardly seems enough to say thanks for your time and effort. This grew into a large project for you - Thank You. Bill

11-23-2016, 08:17 PM	#412
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Thank you Bill, I am sure you will be pleased with them. Bill

11-24-2016, 12:03 PM	#413
P.S. Senior Member Join Date: Jul 2012 Location: California Posts: 1,695	Re: carburetor 13/32 deep well socket Every one of these posts just makes we, whose number has not yet come up, more and more anxious!

11-29-2016, 12:34 AM	#415
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Guys seriously, lol Please read the instructions when I send the ordering notices. Once again I send a bunch of notices, then guys order and don't include their Ford Barn name, and I have no idea whether they are legit or not with respect to all the original interested parties on here. When I send you notice through FB Mail or PM and you don't include the FB name on the order, I have no idea who you are since I do not see your email address on FB when I send the notice. And if I send you a PM and you don't include your FB name on the order, I have no idea once again who you are. I spent considerable time tonight narrowing (4) people down by geographical location with there FB info and then the shipping address provided. I think my instructions in the notice are pretty simple. I keep reviewing them to see what I am missing, but I think it is pretty clear. Anyway, please read the notice carefully when you get it since it would make things much easier on my end to make sure the original interested parties get their sockets, and not a couple of johnny come lately's slip in ahead. On another note, I have not had a bad review yet of the socket from anyone who has used it so I guess we are doing a good job. I still have few people who have not responded to the notices, even after numerous attempts sending PM's as well as sending to email through FB, and email sent to my personal email, [email protected]. I am planning to put a list of these FB names on here in the near future since some of the members here may be friends with them or have some idea how I can contact them in case the contact information here on FB has changed, or they are no longer on FB. If they are no longer interested it's fine, but I would like to know so I can distribute the sockets I am holding for them to other interested parties who are eager to aquire them. Hope you are all well, Bill

11-29-2016, 11:40 AM	#416
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,175	Re: carburetor 13/32 deep well socket I received mine and the Quality is Great! FYI I'm a Quality Control Inspector and Reverse Engineer. __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask Last edited by Fullraceflathead; 11-29-2016 at 02:24 PM.

11-30-2016, 04:25 PM	#417
Pilotdave Senior Member Join Date: Oct 2010 Location: Grafton, MA Posts: 1,226	Re: carburetor 13/32 deep well socket Wahoo! Mine arrived today - they look really nice. Nice touch with the engraving. I'll try them in the shop shortly. Bill - thanks for this contribution to our hobby. Dave

11-30-2016, 06:29 PM	#418
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: carburetor 13/32 deep well socket It's a very well built socket, and I'm glad the stamping was added. I haven't had a chance to use mine yet, but may have to find a carb just to try it out.

11-30-2016, 06:38 PM	#419
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Thank you for the input Tom. I am confident you will be even happier once you use it. So far nothing but positive reports from everyone. Bill Jr.

12-01-2016, 12:05 PM	#420
Pilotdave Senior Member Join Date: Oct 2010 Location: Grafton, MA Posts: 1,226	Re: carburetor 13/32 deep well socket Put mine to work this morning - worked perfectly on a spare carb. I'm another happy camper!!