|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-06-2019, 01:52 PM | #1 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Table of Finishes
Help!! Somewhere recently while perusing one or another of my Model A reference books I came across a very nice table of finishes for all kinds of parts - both painted and I think hardware also. Foolishly I didn't mark it for future reference! And now I need to find it! I've tried looking through all my books with no luck. Can anyone tell me where it is? I thought it would be in the Judging Standards, but if it's there it sure hides well! Thanks!!
|
02-06-2019, 01:57 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,747
|
Re: Table of Finishes
Look at page 1-18 of the Standards.
Bob |
Sponsored Links (Register now to hide all advertisements) |
|
02-06-2019, 02:07 PM | #3 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Table of Finishes
Great! Thanks! That's just what I was looking for! I must be blind!
I'm trying to find out how the (5?) screws holding on the dash rail should be finished. Nickle plate? Chrome? Painted same color as dash rail? Also, same question about the screws on the front fenders where they come down to the front frame horns and splash shield? |
02-06-2019, 02:18 PM | #4 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Table of Finishes
OK, I found the answer to the fender question on page 13-9 of the Standards. Still need to know about the dash.
|
02-07-2019, 10:59 AM | #5 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: Table of Finishes
Mick Isbell's hardware book shows the instrument panel screws to be nickel plated. The dash rail screws in my car appear to be the same - but it's not a points car.
|
02-07-2019, 11:53 AM | #6 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Table of Finishes
Sponsored Links (Register now to hide all advertisements)
|
02-07-2019, 03:40 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,818
|
Re: Table of Finishes
Quote:
https://mafca.com/cart/index.php?productID=118 A very handy book. .
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
|
02-07-2019, 09:35 PM | #8 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Table of Finishes
Thanks! I've got it on order!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|