Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-23-2020, 03:37 PM   #1
derek costello
Senior Member
 
Join Date: Oct 2019
Location: Niagara Falls Canada
Posts: 106
Default late flathead in early chassis, hoses.

The rad hoses for the lower fit between the late 8BA engine and early chassis
are Ford Bronco 1986 to 91 Carquest - Dayco # D71038.

This offset cut off about 6 1/2' long will solve the problem of hose alignment
on this engine /frame combo.

Like it was made for Flatheaders.
derek costello is offline   Reply With Quote
Old 06-23-2020, 06:19 PM   #2
skidmarks
Senior Member
 
skidmarks's Avatar
 
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
Default Re: late flathead in early chassis, hoses.

Quote:
Originally Posted by derek costello View Post
The rad hoses for the lower fit between the late 8BA engine and early chassis
are Ford Bronco 1986 to 91 Carquest - Dayco # D71038.

This offset cut off about 6 1/2' long will solve the problem of hose alignment
on this engine /frame combo.

Like it was made for Flatheaders.
What year chassis?
skidmarks is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-23-2020, 11:14 PM   #3
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,555
Default Re: late flathead in early chassis, hoses.

Old number was 21236(Carquest) and I have them on my 8BA in 32 chassis.
RalphM is offline   Reply With Quote
Old 06-24-2020, 12:41 PM   #4
HambBurglar
Junior Member
 
HambBurglar's Avatar
 
Join Date: Nov 2013
Location: Cincinnati, Ohio
Posts: 18
Default Re: late flathead in early chassis, hoses.

I also used a Gates hose #21236 for 8BA in ‘32 frame. Worked well.
HambBurglar is offline   Reply With Quote
Old 06-24-2020, 01:10 PM   #5
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 7,476
Default Re: late flathead in early chassis, hoses.

Are these numbers good for 59A in a 32 frame?
Mart is offline   Reply With Quote
Old 06-24-2020, 01:30 PM   #6
John R
Senior Member
 
Join Date: May 2010
Location: near Washington, DC
Posts: 514
Default Re: late flathead in early chassis, hoses.

Sponsored Links (Register now to hide all advertisements)
The lower hose depends greatly on the vertical positioning of the engine. For my 8BA in a 32 frame, I used a Gates 20151 (49-53 Ford) and shortened it a bit. The 20151 has 1/4" less offset than the Gates 21236.
__________________
Those who do not move do not die, but are they not already dead?
John R is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:34 PM.