|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-13-2014, 10:20 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: Wichita Falls, Texas
Posts: 983
|
Follow up on backfire issue
I pulled the intake and exhaust manifolds off the car and found that all 4 exhaust ports were leaking. Upon examining the mating surface, the manifolds are warped, the intake had 2 self tapping screws to fill holes. A call to Piranios model A a parts in Denton, Tx had a new set on the way. I had them coat the exhaust manifold an machine them flat. Replaced the studs,washers, nuts and tighten them up. I then installed the sidebowl carb which I had cleaned while I had it off. I had previously noted that the threads where the sidebowl mounts were pitted. As luck would have it as I tightened it they stripped. So I grabbed the non sidebowl spare and installed it . Success the backfire is gone! Runs great! Now I need a new carb top for a sidebowl. Anyone have a spare
|
10-14-2014, 05:44 PM | #2 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Follow up on backfire issue
Sponsored Links (Register now to hide all advertisements)
Paul in CT |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|