Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-01-2019, 12:54 PM   #1
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 474
Default A head on B engine

what is involved? drill some steam holes? im thinking about using a higher comp A alum head on the B motor
Beater is offline   Reply With Quote
Old 09-01-2019, 02:46 PM   #2
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 981
Default Re: A head on B engine

Hi; My '32 B came with a Model A head and pump, ran fine. In fact it was a Model A "police" Ford high comp head..... a 'B' head. Check the gaskets for any changes. Newc
Newc is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-01-2019, 04:07 PM   #3
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 474
Default Re: A head on B engine

well this B has the C head on it, which is high comp I guess. just thinking about going A head so a waterpump is more avalable
Beater is offline   Reply With Quote
Old 09-01-2019, 04:41 PM   #4
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 6,401
Default Re: A head on B engine

The stock B head with the C on it is 4.6:1 and the stock A head is 4.22:1.


Bob
Bob C is offline   Reply With Quote
Old 09-01-2019, 05:15 PM   #5
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 474
Default Re: A head on B engine

yes I did know that. what I want to know is what has to be don't to use an A head on B block. thinking about using an aftermarket alum head for an A
Beater is offline   Reply With Quote
Old 09-01-2019, 10:35 PM   #6
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 981
Default Re: A head on B engine

Have you ever heard of the S.S.O.S Society? Dedicated to Ford fours. Secret
Society of Speed google it- has been around 25 yrs, based in Ohio. Newc
Newc is offline   Reply With Quote
Old 09-02-2019, 09:03 AM   #7
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 4,787
Default Re: A head on B engine

Between #2,3 there's 2 small holes, depending on the head, and gasket used those 2 holes may need to be plugged
Kurt in NJ is offline   Reply With Quote
Old 09-02-2019, 10:51 AM   #8
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 474
Default Re: A head on B engine

Quote:
Originally Posted by Kurt in NJ View Post
Between #2,3 there's 2 small holes, depending on the head, and gasket used those 2 holes may need to be plugged
or drill out the steam holes to match in the head?
Beater is offline   Reply With Quote
Old 09-02-2019, 01:35 PM   #9
barnstuf
Senior Member
 
Join Date: May 2010
Location: Cape Cod MA
Posts: 2,714
Default Re: A head on B engine

Many years ago I ran a Model A cylinder head on a Model B engine in my 1929 Station Wagon with oversize tires for hard driving on sandy beaches. At the time my nephew was a hot rodder and he threaded bolts into the two steam holes that are in the block, then cut and filed them flat. Used the regular Model A cylinder head gasket, drove many miles over about 12 years, never had a problem.
barnstuf is offline   Reply With Quote
Old 09-02-2019, 01:46 PM   #10
KGS
Senior Member
 
KGS's Avatar
 
Join Date: May 2010
Location: Schooley's Mountain
Posts: 396
Default Re: A head on B engine

I'm not a Ford Four Banger guy so the

steam hole doesn't compute with me. Can
any of you guys fill us in? Thanks
KGS is offline   Reply With Quote
Old 09-02-2019, 04:56 PM   #11
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 474
Default Re: A head on B engine

Quote:
Originally Posted by KGS View Post
I'm not a Ford Four Banger guy so the

steam hole doesn't compute with me. Can
any of you guys fill us in? Thanks
from what ive learned there are two extra " steam holes" in the B block between 2 and 3 cylinder. A doesn't have this added cooling I guess.
Beater is offline   Reply With Quote
Old 09-03-2019, 09:13 AM   #12
1931 flamingo
Senior Member
 
1931 flamingo's Avatar
 
Join Date: May 2010
Location: new britain,ct 06052
Posts: 8,128
Default Re: A head on B engine

Ck out Vince Falter's site or try the A forum OR a search. Steam hole filling has been covered before.
Paul in CT
1931 flamingo is offline   Reply With Quote
Old 09-03-2019, 09:51 PM   #13
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 1,762
Default Re: A head on B engine

vince falters site is wonderful. i believe its "the old ford garage"
cas3 is online now   Reply With Quote
Old 09-04-2019, 05:57 AM   #14
KGS
Senior Member
 
KGS's Avatar
 
Join Date: May 2010
Location: Schooley's Mountain
Posts: 396
Default Re: A head on B engine

Thanks. Will check it out.
KGS is offline   Reply With Quote
Old 09-04-2019, 09:36 PM   #15
Tinker
Senior Member
 
Tinker's Avatar
 
Join Date: May 2010
Location: MN/FL
Posts: 4,844
Default Re: A head on B engine

https://www.jalopyjournal.com/forum/...-links.161498/


There is a monthly "banger" thread. Not sure it's still active.


If not, the model A forum here is good. They know touring As and B motors.


.

Last edited by Tinker; 09-04-2019 at 09:45 PM.
Tinker is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:04 PM.