Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-03-2019, 08:06 AM   #1
bullrunmotor
Senior Member
 
Join Date: May 2010
Location: Virginia
Posts: 139
Default PCV Valve for 292 and source for rubber valley/valve cover gaskets

Can anyone suggest what PCV valve& grommet set up fits in place of the draft tube in the oil valley plate. I've seen pictures on the internet-maybe a kit is available. Also-does anyone know a supplier that still supplies rubber-not cork-valve cover and oil valley cover plate gaskets. Thanks a lot.
bullrunmotor is offline   Reply With Quote
Old 09-03-2019, 09:34 AM   #2
Ole Don
Senior Member
 
Ole Don's Avatar
 
Join Date: May 2010
Location: St. Michael, Minnesota
Posts: 1,510
Default Re: PCV Valve for 292 and source for rubber valley/valve cover gaskets

Grommet and PCV for a Mustang 302. Glue the grommet in, it may not fit perfectly.
Ole Don is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-03-2019, 09:23 PM   #3
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 2,470
Default Re: PCV Valve for 292 and source for rubber valley/valve cover gaskets

Have you checked with a local parts store on the rubber gaskets? Try a listing for a 60-64 Ford F150, 292 engine.


Also try John Mummert
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Old 09-13-2019, 10:23 PM   #4
My Old Blue
Member
 
Join Date: Oct 2017
Location: KY
Posts: 78
Default Re: PCV Valve for 292 and source for rubber valley/valve cover gaskets

I just went down this road. O'Reillys has the Dorman grommet with the notch to fit the lip in the hole, sorry I do not have the number but I held it in my hand as I needed a thinner notch. PCV I used was Microgard PCV178, it specs out to be the closest match I could find. Both for about $7
My Old Blue is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:22 PM.