The Ford Barn

Jack E/NJ · 08-13-2021, 03:05 PM

https://www.jalopyjournal.com/forum/...usher.1238274/

Kube · 08-13-2021, 03:47 PM

Quote:

Originally Posted by Jack E/NJ

https://www.jalopyjournal.com/forum/...usher.1238274/

Realistically, most (nearly all) of that stuff is worth more per pound. The top load transmission cases may be worth more then scrap if they look better on the inside than the outside.

jimTN · 08-13-2021, 04:04 PM

Not total junk, those housings have lots of uses and the transmission stuff at the least would be cases and small hardware and I believe I saw some exh manifolds in the pile.

ford38v8 · 08-13-2021, 04:13 PM

Sponsored Links (Register now to hide all advertisements)

If nobody takes the generators, the copper winding is worth a fortune in scrap value. On the other end of value are the fans, not to be trusted without very careful inspection for cracks, and even then, hold your breath!

08-13-2021, 03:05 PM	#1
Jack E/NJ Senior Member Join Date: May 2010 Posts: 2,173	Heavy 39/40 parts on HAMB https://www.jalopyjournal.com/forum/...usher.1238274/

08-13-2021, 04:04 PM	#3
jimTN Senior Member Join Date: May 2010 Location: Powell, TN Posts: 2,509	Re: Heavy 39/40 parts on HAMB Not total junk, those housings have lots of uses and the transmission stuff at the least would be cases and small hardware and I believe I saw some exh manifolds in the pile.

08-13-2021, 04:13 PM	#4
ford38v8 Senior Member Join Date: Jul 2011 Location: SF Bay Area Posts: 6,645	Re: Heavy 39/40 parts on HAMB Sponsored Links (Register now to hide all advertisements) If nobody takes the generators, the copper winding is worth a fortune in scrap value. On the other end of value are the fans, not to be trusted without very careful inspection for cracks, and even then, hold your breath! __________________ Alan