The Ford Barn

flybob08 · 09-17-2021, 02:45 PM

I have an open hole in the top of the door and one on the upper trailing part of the door around the lock area. I have filled them with rubber plugs on an interim basis. Is there a specific part that should go in either or both holes. The holes are on both the right and left side of the truck.

Thanks, as always

Bob

f balsiger · 09-17-2021, 03:16 PM

hole for side curtain rod?

chrs1961815 · 09-17-2021, 03:20 PM

I believe the top one is for the side curtain rod and the side one for one of the snap inserts for the curtain.

d. · 09-17-2021, 06:09 PM

post above...CRS has it right, top hole is for the side curtain rod, side facing hole is for the side curtain itself.

700rpm · 09-18-2021, 03:56 PM

Sponsored Links (Register now to hide all advertisements)

The original side curtain snaps are unique, and used to be very hard to find. I don’t know if they’ve been reproduced.

09-17-2021, 03:16 PM	#2
f balsiger Member Join Date: May 2010 Posts: 37	Re: Roadster Pick-up Door hole for side curtain rod?

09-17-2021, 03:20 PM	#3
chrs1961815 Senior Member Join Date: Jul 2018 Location: Spring Grove, Illinois Posts: 1,371	Re: Roadster Pick-up Door I believe the top one is for the side curtain rod and the side one for one of the snap inserts for the curtain. __________________ "The more things change, the more they stay the same."

09-17-2021, 06:09 PM	#4
d. Senior Member Join Date: May 2010 Location: Raleigh, NC Posts: 510	Re: Roadster Pick-up Door post above...CRS has it right, top hole is for the side curtain rod, side facing hole is for the side curtain itself.

09-18-2021, 03:56 PM	#5
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,902	Re: Roadster Pick-up Door Sponsored Links (Register now to hide all advertisements) The original side curtain snaps are unique, and used to be very hard to find. I don’t know if they’ve been reproduced. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.