Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-14-2016, 11:18 PM   #1
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,903
Default My annual antifreeze question

I ask this every year, because antifreeze products keep changing. I have always used denatured alcohol in my A's because some older types of antifreeze, if it happened to leak into the crankcase, would destroy the babbit. Can anyone recommend a current antifreeze that will not damage babbit if it gets to the crankcase?

I can still go with the alcohol, but it's getting more expensive. Maybe still cheaper than antifreeze though.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 10-14-2016, 11:33 PM   #2
Capt Quahog
Senior Member
 
Capt Quahog's Avatar
 
Join Date: Jan 2016
Location: Barren windswept mountain somewhere in bleak Northeastern Pennsylvania
Posts: 294
Default Re: My annual antifreeze question

We always use PEAK brand anti-freeze. Suppose to be safe for old cars and seems to function okay in three assorted vintage automobiles as well as my 20-year Toyota Hilux truck.

For assorted reasons . . . avoid any type of PRESTONE brand
__________________
I wouldn't be so paranoid if people weren't plotting against me all the time
Capt Quahog is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-15-2016, 09:03 AM   #3
40 Deluxe
Senior Member
 
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
Default Re: My annual antifreeze question

Ethylene glycol damages modern bearings, too. If I remember correctly, propylene glycol is OK, but do your own research first. I don't think the brand matters, ethylene glycol is ethylene glycol. It's just the additives and the advertising that is different. The additives do make it unwise to mix different types, however. With new vehicles, it's a whole different ball of wax!
40 Deluxe is offline   Reply With Quote
Old 10-15-2016, 09:28 AM   #4
C26Pinelake
BANNED
 
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
Default Re: My annual antifreeze question

Quote:
Originally Posted by Capt Quahog View Post
We always use PEAK brand anti-freeze. Suppose to be safe for old cars and seems to function okay in three assorted vintage automobiles as well as my 20-year Toyota Hilux truck.

For assorted reasons . . . avoid any type of PRESTONE brand
What are the assorted reasons ? Wayne.
C26Pinelake is offline   Reply With Quote
Old 10-15-2016, 09:41 AM   #5
holdover
Senior Member
 
Join Date: May 2011
Location: SW Virginia near the Blue ridge Parkway
Posts: 674
Default Re: My annual antifreeze question

Sponsored Links (Register now to hide all advertisements)
I have all those testers mentioned, but the refractometer , so for 22 bucks I am going to try one. I have over 15 vehicles between the daily drivers, antiques and farm vehicles, would like to be able tho verify the readings.

http://www.ebay.com/itm/Car-Auto-Ant...1%26rkt%3D1%26
holdover is offline   Reply With Quote
Old 10-15-2016, 09:46 AM   #6
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,340
Default Re: My annual antifreeze question

Anti-freeze will not destroy babbitt. Water displacing the oil in the rods or mains will however.
redmodelt is offline   Reply With Quote
Old 10-15-2016, 10:33 AM   #7
C26Pinelake
BANNED
 
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
Default Re: My annual antifreeze question

Quote:
Originally Posted by 700rpm View Post
I ask this every year, because antifreeze products keep changing. I have always used denatured alcohol in my A's because some older types of antifreeze, if it happened to leak into the crankcase, would destroy the babbit. Can anyone recommend a current antifreeze that will not damage babbit if it gets to the crankcase?

I can still go with the alcohol, but it's getting more expensive. Maybe still cheaper than antifreeze though.
You may save a couple bucks but alcohol does no have rust inhibitor in it. Do you add rust inhibitor? You can't live in fear of what might happen. Wayne
C26Pinelake is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:10 PM.