Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-04-2017, 12:28 PM   #1
swisshotrod
Junior Member
 
Join Date: Jan 2015
Location: Switzerland / Florida
Posts: 2
Default Front Fender Welled

Dose anyone know where I can get some original steal front fender welled
swisshotrod is offline   Reply With Quote
Old 05-04-2017, 01:04 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 9,094
Default Re: Front Fender Welled

Probably. Do you want to be more specific on what year it needs to fit, and what side you are needing?

Oh, and welcome to Fordbarn.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-04-2017, 01:25 PM   #3
swisshotrod
Junior Member
 
Join Date: Jan 2015
Location: Switzerland / Florida
Posts: 2
Default Re: Front Fender Welled

1929 Roadster left and right
swisshotrod is offline   Reply With Quote
Old 05-04-2017, 01:37 PM   #4
JohnLaVoy
Senior Member
 
JohnLaVoy's Avatar
 
Join Date: Jun 2014
Location: Rocklin, CA
Posts: 779
Default Re: Front Fender Welled

You can install wells in original fenders and you can buy a nice reproduction fender with the well, those are available from Brookville roadster brookvilleroadster.com
JohnLaVoy is offline   Reply With Quote
Old 05-04-2017, 01:46 PM   #5
George Miller
Senior Member
 
George Miller's Avatar
 
Join Date: May 2010
Location: NC
Posts: 2,975
Default Re: Front Fender Welled

Quote:
Originally Posted by JohnLaVoy View Post
You can install wells in original fenders and you can buy a nice reproduction fender with the well, those are available from Brookville roadster brookvilleroadster.com
That would be a good idea, then it could be changed back. The wells make it a little hard to get in on a 28,or 29.
George Miller is offline   Reply With Quote
Old 05-04-2017, 05:52 PM   #6
larrys40
Senior Member
 
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,732
Default Re: Front Fender Welled

I dropped a fender by Bill Gift in PA several years ago on my way to Hershey and he did it while I waited. Now I do all my own metal work and fender repairs but installing the well.... and getting all the details just so.. well.. lets just say you have to be "gifted" . no pun intended. He put them in with the correct scallops on the ends like on the 30/31's perfectly.. has done lots of them and did a superb job. If you want his number pm me.

He's truly a "gifted" metal fabricator. You can of course do them yourself but it is at your own peril. I preferred the correct spot welds and no filler. I refinished the rest of the fender and the final product with the well turned out perfect!

Larry Shepard
larrys40 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:05 AM.