The Ford Barn

48Ratfink · 06-19-2011, 09:22 PM

What holds the seat back to the lid?

bogdonj · 06-19-2011, 09:57 PM

mine has 2 notch's cut into the back of the lid and the back of the seat has 2 tabs that come out and hook into the notch's... Also I believe they get anchored at the bottom also

Justin

Aerocraft · 06-19-2011, 10:03 PM

In addition to the two upper "hooks", there are two "tabs" on the bottom of the cushion that are secured to the lid with two round head machine screws. Gar Williams

48Ratfink · 06-19-2011, 10:19 PM

Thanks Guy's I will check for that tomorrow

mot · 06-19-2011, 11:20 PM

Sponsored Links (Register now to hide all advertisements)

heres what they look like
the two tabs at the top go into slots on the lid
and the two tabs at the bottom are screwed to the decklid with a round head bolt and washer
the last picture shows the tab in the rumble lid but its broken
it just shows how it looks
tom

06-19-2011, 09:22 PM	#1
48Ratfink Senior Member Join Date: Jan 2011 Location: Opelika,Al. Posts: 132	Rumble seat What holds the seat back to the lid?

06-19-2011, 09:57 PM	#2
bogdonj Senior Member Join Date: Aug 2010 Location: Walkerton, Ont. Canada Posts: 623	Re: Rumble seat mine has 2 notch's cut into the back of the lid and the back of the seat has 2 tabs that come out and hook into the notch's... Also I believe they get anchored at the bottom also Justin

06-19-2011, 10:03 PM	#3
Aerocraft Senior Member Join Date: May 2010 Location: Naperville, IL Posts: 1,387	Re: Rumble seat In addition to the two upper "hooks", there are two "tabs" on the bottom of the cushion that are secured to the lid with two round head machine screws. Gar Williams

06-19-2011, 10:19 PM	#4
48Ratfink Senior Member Join Date: Jan 2011 Location: Opelika,Al. Posts: 132	Re: Rumble seat Thanks Guy's I will check for that tomorrow