Early Ford Kingpin Needed!!!!!

[Phantom Phaeton]

Sponsored Links (Register now to hide all advertisements)

Attached below are photos of three early Ford kingpins. On the far right is stock 37-41, middle is stock 35-36, and far left is a mystery pin. I need another one of these mystery pins. It has the same length (5.15") as a stock 32-36 kingpin, and same notch dimension as the stock 32-36 pin (2.84" from shoulder to center of notch). In other words, this pin shares all the same dimensions as the stock 32-36 pin, but the only difference is the fact that in doesn't have the mechanical brake cup on the top. I want another one of these pins to use with hydraulic brakes with stock 32-34 spindles. Does anyone have one/two in their parts stash. Thanks, David