Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-22-2020, 10:37 PM   #1
Steve Plucker
Senior Member
 
Steve Plucker's Avatar
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 5,858
Default Starter switch parts???

I have these two parts which are the same.

They are made of fiber and the area where the 3/8" hole is measures 3/4 x 3/4, then it shoots up at a 90 degree angle for 1/4 inch.

I believe it goes within the early square starter, the 3/8 inch hole acceoting the battery cable bolt...but just where in the assembly I have no idea unless it is situated near the metal casing.

Anyone?

Thanks.

Pluck

Photo to come soon.
__________________
www.plucks329s.org

Walla Walla (WA) Sweet A's since 1993

MARC/MAFCA member since 1978

Ford Model AA Truck Club since 1998

(LIONEL/MTH Toy Train Collector, Orange Crush Soda Collector, Steel Beer Can Collector, Old Gas Pump Collector)
Steve Plucker is online now   Reply With Quote
Old 04-22-2020, 11:24 PM   #2
Dan Partain
Senior Member
 
Dan Partain's Avatar
 
Join Date: May 2010
Location: Hangtown, CA
Posts: 485
Default Re: Starter switch parts???

Here's the photo for Pluck.
Attached Images
File Type: jpg DSCN1785.jpg (88.1 KB, 35 views)
Dan Partain is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-23-2020, 06:03 AM   #3
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 854
Default Re: Starter switch parts???

I have seen these on the regular starter switches as well. I wish somebody would reproduce them, but you could make them yourself. At any rate I think a lot of people don't have them in their switches as nothing seems to happen.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 04-23-2020, 01:07 PM   #4
d.j. moordigian
Senior Member
 
d.j. moordigian's Avatar
 
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,601
Default Re: Starter switch parts???

Here you go Pluck...you remember this?....lol

https://www.fordbarn.com/forum/showt...starter+switch
d.j. moordigian is offline   Reply With Quote
Old 04-23-2020, 02:23 PM   #5
Steve Plucker
Senior Member
 
Steve Plucker's Avatar
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 5,858
Default Re: Starter switch parts???

Quote:
Originally Posted by d.j. moordigian View Post
Here you go Pluck...you remember this?....lol

https://www.fordbarn.com/forum/showt...starter+switch
Hell, I can't remember what I did yesterday let alone 9 years ago!

OK...I have just three of those and three square starter switches...SO they must belong to the early type switch.

I think I figured it out as to where they go in the assembly of things.

They go on the inside just before you slide the battery cable bolt through the casing...it is the only place I can see as to where it goes.

Pluck
__________________
www.plucks329s.org

Walla Walla (WA) Sweet A's since 1993

MARC/MAFCA member since 1978

Ford Model AA Truck Club since 1998

(LIONEL/MTH Toy Train Collector, Orange Crush Soda Collector, Steel Beer Can Collector, Old Gas Pump Collector)
Steve Plucker is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:39 PM.