The Ford Barn

Walt Ebie · 08-04-2016, 07:30 PM

I'm looking for just one bolt that seems to be sold only in sets of four. Depending on which place you look, it's a Radiator Shield Mounting Bolt, a Hex Radiator Splash Shield Mounting Stud, or a Radiator Apron Mounting Stud. Problem is I sheared off a bolt in one of the Mounting Studs and followed that up with using one of these screw removers and then sheared it off IN the mounting bolt. So unless I can find a way to remove the bolt and remover from the stud I'll have to bite the bullet and buy a set of four unless someone knows where they're sold one at a time.

C26Pinelake · 08-04-2016, 09:10 PM

How much are we talking here, less than 5 dollars a set ? Wayne

700rpm · 08-04-2016, 10:51 PM

Yeah, the price of experience.

J Franklin · 08-04-2016, 11:22 PM

But you will have three spares for your friends.

Walt Ebie · 08-05-2016, 05:33 AM

Yeah, I could give them out as door prizes at the next club meeting! Just what everybody needs. Especially me.

ron103140 · 08-05-2016, 06:08 AM

Sponsored Links (Register now to hide all advertisements)

Walt, I may have one original in my stuff. I will look this morning and get back to you if you still need it. My email is [email protected]. Ron

Quigley1930 · 08-05-2016, 10:21 PM

There are two lengths. I have two but don't know which I have at the moment. Let me know what you need the long or short one. I'll look tomorrow and if I have what you want you can have it for the postage.

Sewall

Art Newland · 08-05-2016, 10:31 PM

Walt... you're a Model A owner... you're supposed to have 3 spares of everything anyway!

1931 flamingo · 08-06-2016, 07:31 AM

Going to cost just as much to ship one as four.....................

Paul in CT

C26Pinelake · 08-06-2016, 07:35 AM

what is the cost for four ? Wayne

stouchton · 08-06-2016, 07:37 AM

Carbide endmill or carbide drill bit can remove a hardened screw extractor.

If it is recessed, a drill bushing with a carbide endmill can work miracles. I simply used the endmill in my cordless drill - took less than a minute.

Remember to use cutting fluid to prolong life of tool...

Tom Wesenberg · 08-06-2016, 10:34 AM

Quote:

Originally Posted by stouchton

Carbide endmill or carbide drill bit can remove a hardened screw extractor.

If it is recessed, a drill bushing with a carbide endmill can work miracles. I simply used the endmill in my cordless drill - took less than a minute.

Remember to use cutting fluid to prolong life of tool...

I used my Dremel with a small diamond bit to remove same. It's slow, but works.

Walt Ebie · 08-06-2016, 04:27 PM

Quigley.....I need the short one. Hope you have one!

Walt Ebie · 08-06-2016, 04:28 PM

Ron.....I forgot to tell you - I need the short one - goes in the front location.

C26Pinelake · 08-06-2016, 04:51 PM

please don't tell me these are the bolts that sell for $11 dollars a set! Wayne

Quigley1930 · 08-07-2016, 07:37 PM

Walt I have one. It's the round one. Yours for the postage. Send me an email if still interested.

Sewall Tyler

Walt Ebie · 08-08-2016, 06:56 AM

Thanks for the offer, Sewall, but I need the short, hexagonal bolt (abt 3 1/4 inches).

Quigley1930 · 08-08-2016, 08:32 AM

Walt what I have is the sane as the hexagonal style. It will work just fine but if you are going for judjing then I guess they should match.
Sewall

C26Pinelake · 08-08-2016, 09:50 AM

After all this time and discussion, don't you wish you would have just went ahead and bought the set of four ! Wayne

BILL WILLIAMSON · 08-08-2016, 02:19 PM

At garage sales, always ask, "Got a BOX/CAN of old BOLTS/NUTS/SCREWS"?
Bill Hoarder

08-04-2016, 07:30 PM	#1
Walt Ebie Senior Member Join Date: Sep 2014 Location: East Canton, OH Posts: 168	Does anybody sell just one? I'm looking for just one bolt that seems to be sold only in sets of four. Depending on which place you look, it's a Radiator Shield Mounting Bolt, a Hex Radiator Splash Shield Mounting Stud, or a Radiator Apron Mounting Stud. Problem is I sheared off a bolt in one of the Mounting Studs and followed that up with using one of these screw removers and then sheared it off IN the mounting bolt. So unless I can find a way to remove the bolt and remover from the stud I'll have to bite the bullet and buy a set of four unless someone knows where they're sold one at a time.

08-04-2016, 09:10 PM	#2
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Does anybody sell just one? How much are we talking here, less than 5 dollars a set ? Wayne

08-04-2016, 10:51 PM	#3
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,903	Re: Does anybody sell just one? Yeah, the price of experience. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.

08-04-2016, 11:22 PM	#4
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,961	Re: Does anybody sell just one? But you will have three spares for your friends.

08-05-2016, 05:33 AM	#5
Walt Ebie Senior Member Join Date: Sep 2014 Location: East Canton, OH Posts: 168	Re: Does anybody sell just one? Yeah, I could give them out as door prizes at the next club meeting! Just what everybody needs. Especially me.

08-05-2016, 06:08 AM	#6
ron103140 Member Join Date: Feb 2012 Posts: 74	Re: Does anybody sell just one? Sponsored Links (Register now to hide all advertisements) Walt, I may have one original in my stuff. I will look this morning and get back to you if you still need it. My email is [email protected]. Ron

08-05-2016, 10:21 PM	#7
Quigley1930 Senior Member Join Date: Jun 2010 Location: Middleburg, Virginia Posts: 421	Re: Does anybody sell just one? There are two lengths. I have two but don't know which I have at the moment. Let me know what you need the long or short one. I'll look tomorrow and if I have what you want you can have it for the postage. Sewall

08-05-2016, 10:31 PM	#8
Art Newland Senior Member Join Date: Mar 2016 Location: Lynden, WA Posts: 1,564	Re: Does anybody sell just one? Walt... you're a Model A owner... you're supposed to have 3 spares of everything anyway!

08-06-2016, 07:31 AM	#9
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,390	Re: Does anybody sell just one? Going to cost just as much to ship one as four..................... Paul in CT

08-06-2016, 07:35 AM	#10
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Does anybody sell just one? what is the cost for four ? Wayne

08-06-2016, 07:37 AM	#11
stouchton Senior Member Join Date: Jun 2013 Location: Pottstown, PA Posts: 342	Re: Does anybody sell just one? Carbide endmill or carbide drill bit can remove a hardened screw extractor. If it is recessed, a drill bushing with a carbide endmill can work miracles. I simply used the endmill in my cordless drill - took less than a minute. Remember to use cutting fluid to prolong life of tool...

08-06-2016, 04:27 PM	#13
Walt Ebie Senior Member Join Date: Sep 2014 Location: East Canton, OH Posts: 168	Re: Does anybody sell just one? Quigley.....I need the short one. Hope you have one!

08-06-2016, 04:28 PM	#14
Walt Ebie Senior Member Join Date: Sep 2014 Location: East Canton, OH Posts: 168	Re: Does anybody sell just one? Ron.....I forgot to tell you - I need the short one - goes in the front location.

08-06-2016, 04:51 PM	#15
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Does anybody sell just one? please don't tell me these are the bolts that sell for $11 dollars a set! Wayne

08-07-2016, 07:37 PM	#16
Quigley1930 Senior Member Join Date: Jun 2010 Location: Middleburg, Virginia Posts: 421	Re: Does anybody sell just one? Walt I have one. It's the round one. Yours for the postage. Send me an email if still interested. Sewall Tyler

08-08-2016, 06:56 AM	#17
Walt Ebie Senior Member Join Date: Sep 2014 Location: East Canton, OH Posts: 168	Re: Does anybody sell just one? Thanks for the offer, Sewall, but I need the short, hexagonal bolt (abt 3 1/4 inches).

08-08-2016, 08:32 AM	#18
Quigley1930 Senior Member Join Date: Jun 2010 Location: Middleburg, Virginia Posts: 421	Re: Does anybody sell just one? Walt what I have is the sane as the hexagonal style. It will work just fine but if you are going for judjing then I guess they should match. Sewall

08-08-2016, 09:50 AM	#19
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Does anybody sell just one? After all this time and discussion, don't you wish you would have just went ahead and bought the set of four ! Wayne

08-08-2016, 02:19 PM	#20
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Does anybody sell just one? At garage sales, always ask, "Got a BOX/CAN of old BOLTS/NUTS/SCREWS"? Bill Hoarder __________________ "THE ASSISTANT GURU OF STUFF"