The Ford Barn

45yellowford · 12-29-2019, 02:16 PM

Sponsored Links (Register now to hide all advertisements)

This is a fresh rebuilt 59a that i rebuilt for a car project that has been sold.the engine is on my engine stand so that it can be started.
The machine shop work included reground crank shaft, rebored cylinders, magnaflus block and crank, resurface valve seats, and resurface flywheel. The new parts include water pumps, oil pump, fuel pump, main and rod bearings, pistons and rings, camshaft, valves, valve springs, lifters, high torque starter, and gaskets. The engine is stored in a heated area and on an engine stand. You are welcome to come to my shop and check it out.
I will put it on a pallet and deliver it to fastenall or to a trucking co at no additional charge.
Contact me at 208 528 2850 [email protected]

12-29-2019, 02:16 PM	#1
45yellowford Junior Member Join Date: May 2010 Location: Idaho Posts: 22	Flathead 59a complete running engine City: IDAHO FALLS State: ID Price: 4800. Sponsored Links (Register now to hide all advertisements) This is a fresh rebuilt 59a that i rebuilt for a car project that has been sold.the engine is on my engine stand so that it can be started. The machine shop work included reground crank shaft, rebored cylinders, magnaflus block and crank, resurface valve seats, and resurface flywheel. The new parts include water pumps, oil pump, fuel pump, main and rod bearings, pistons and rings, camshaft, valves, valve springs, lifters, high torque starter, and gaskets. The engine is stored in a heated area and on an engine stand. You are welcome to come to my shop and check it out. I will put it on a pallet and deliver it to fastenall or to a trucking co at no additional charge. Contact me at 208 528 2850 [email protected]