Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-01-2020, 01:28 PM   #1
Dave/Green Bay
Senior Member
 
Join Date: May 2010
Location: Green Bay
Posts: 391
Default Compression tester

Does anyone have a recommendation for a compression tester that comes with
an adapter for a Flathead. Everything I see comes with mm adapters. Thanks Dave/Green Bay
Dave/Green Bay is online now   Reply With Quote
Old 07-01-2020, 01:42 PM   #2
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,924
Default Re: Compression tester

Aren't all spark plugs metric thread? According to Machinery's Handbook (24th ed pg 1650), there are four standard SAE spark plug threads, all metric: M18 x 1.5; M14 x 1.25; M12 x 1.25; and M10 x 1.0
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-01-2020, 01:43 PM   #3
fordwife
Senior Member
 
Join Date: Dec 2015
Posts: 287
Default Re: Compression tester

All ford v8 heads,flatheads from 39 aand up have 14mm spark plugs. some in the early 30s had 18 mm plugs if I remember right.
fordwife is offline   Reply With Quote
Old 07-01-2020, 01:47 PM   #4
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,924
Default Re: Compression tester

Quote:
Originally Posted by fordwife View Post
All ford v8 heads,flatheads from 39 aand up have 14mm spark plugs. some in the early 30s had 18 mm plugs if I remember right.

Yup! My '34 has 18mm plugs....
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is offline   Reply With Quote
Old 07-01-2020, 01:56 PM   #5
Dave/Green Bay
Senior Member
 
Join Date: May 2010
Location: Green Bay
Posts: 391
Default Re: Compression tester

Thanks. Just what I needed. That makes the search much easier.
Dave/Green Bay is online now   Reply With Quote
Old 07-01-2020, 02:40 PM   #6
oldford2
Senior Member
 
oldford2's Avatar
 
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
Default Re: Compression tester

Sponsored Links (Register now to hide all advertisements)
I bought mine at Harbor Freight
John
oldford2 is offline   Reply With Quote
Old 07-01-2020, 03:44 PM   #7
flatheadmurre
Senior Member
 
flatheadmurre's Avatar
 
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
Default Re: Compression tester

Model B and real early V8 had 7/8 plugs didnīt they ?
But after that metric.
flatheadmurre is offline   Reply With Quote
Old 07-01-2020, 03:51 PM   #8
B-O-B
Senior Member
 
B-O-B's Avatar
 
Join Date: May 2010
Location: Ft Mohave,Az
Posts: 1,984
Default Re: Compression tester

O'Reilly Auto Parts is where I bought mine.
B-O-B is offline   Reply With Quote
Old 07-01-2020, 04:31 PM   #9
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: Compression tester

Ones with long rubber hoses tend to give lower readings due to hose expansion, I look for Steel cord in the hoses
Kurt in NJ is offline   Reply With Quote
Old 07-03-2020, 05:49 AM   #10
Mac VP
Senior Member
 
Mac VP's Avatar
 
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,356
Default Re: Compression tester

Don’t forget to check that the adapter for the plug hole doesn’t thread too far down into the opening.....it could hit moving valves. A guy I know used one with a long adapter plug on a fresh built engine and ended up having to replace a valve if I remember correctly.
__________________
VANPELT SALES LLC
Cincinnati, Ohio
Office: 513-724-9486
www.vanpeltsales.com
www.classictransmission.com
Mac VP is offline   Reply With Quote
Old 07-03-2020, 07:07 AM   #11
34fordy
Senior Member
 
34fordy's Avatar
 
Join Date: Dec 2014
Location: Fort dodge, Iowa
Posts: 814
Default Re: Compression tester

Quote:
Originally Posted by flatheadmurre View Post
Model B and real early V8 had 7/8 plugs didnīt they ?
But after that metric.
7/8" wrench but threads are 18MM
34fordy is online now   Reply With Quote
Old 07-03-2020, 07:54 AM   #12
oldford2
Senior Member
 
oldford2's Avatar
 
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
Default Re: Compression tester

Quote:
Originally Posted by Kurt in NJ View Post
Ones with long rubber hoses tend to give lower readings due to hose expansion, I look for Steel cord in the hoses
I think that 100# may slightly expand a rubber hose but it is still 100#. Not reduced. JMHO
John
oldford2 is offline   Reply With Quote
Old 07-03-2020, 08:57 AM   #13
fordwife
Senior Member
 
Join Date: Dec 2015
Posts: 287
Default Re: Compression tester

I've been told we ended up with mm spark plug sizes due to the influence of Robert Bosch' an early day electrical engineer and manufacturer, who was of German descent.
fordwife is offline   Reply With Quote
Old 07-03-2020, 08:36 PM   #14
grumppyoldman
Senior Member
 
grumppyoldman's Avatar
 
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
Default Re: Compression tester

Dave when doing the test, have all plugs removed and the throttle wide open for best results. You can test it dry then add a little oil to see if it changes the readings, do one cyl. at a time or the oil can drain by rings and give different results. I bought a Bosch tester from O'Rileys. Al
grumppyoldman is offline   Reply With Quote
Old 07-04-2020, 10:23 AM   #15
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: Compression tester

Quote:
Originally Posted by oldford2 View Post
I think that 100# may slightly expand a rubber hose but it is still 100#. Not reduced. JMHO
John
When the gauges are checked to a standard pressure and read the same---then when used to check engine compression they read different, the long soft rubber hosed ones read lower, when you move into the high end recording testers the hoses are short, metal reinforced,and the passage is filled with wires to reduce volume

When testing compression it's not as much about how high the gauge eventually gets, it's more about what happens on the first few compression strokes, and testing all the cylinders the same ---you have to remember that to fire there is only one compression stroke
Kurt in NJ is offline   Reply With Quote
Old 07-05-2020, 12:52 AM   #16
Tinker
Senior Member
 
Tinker's Avatar
 
Join Date: May 2010
Location: MN
Posts: 7,053
Default Re: Compression tester

If you have a 37 21 stud or earlier 18mm plugs. just get one of these for compression checks.


https://www.snydersantiqueauto.com/P...earchByKeyword


If using 18mm I like autolite as they still have screw tops and you can run raja ends.

Last edited by Tinker; 07-05-2020 at 01:03 AM.
Tinker is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:22 AM.