Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-16-2019, 11:25 AM   #1
Kentmac
Member
 
Join Date: Sep 2016
Location: Manchester, Mich
Posts: 35
Default Transmission gear/shaft question

In the process of working on the transmission in my model A and need some advice. I am replacing all the bearings and discovered the main shaft (not gear shaft) has some scoring so I ordered a new main shaft and received it from Snyders. The issue I am having is that the gears were difficult to install on the main shaft and do not slide freely back and forth. I put some grease on the shaft and can move the gears by hand but I think they are too tight. Any advice would be appreciated
Kentmac is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:52 AM.