The Ford Barn

Model A Fan · 09-16-2012, 10:42 PM

Its time to clean out the garage and sell a bunch of extra sheet metal, some in pretty good shape to some in decent shape, but it may take a little work. I would gladly trade for good condition Model A banger/speed parts. Looking for a double intake, downdraft carbs, high compression head, lakes headers, etc. Please let me know what you have. Also interested in shock linkages too.

It is all for 30-31 bodies, primarily coupe, sport coupe and roadsters. All prices are excluding shipping.

Running Boards (Gray)-these are in fantastic shape. No dents, dings or rust at all! Masking tape is over the chrome still to protect it from scuffs and scrapes. Has the splash aprons welded on! Nice US made part!-$275

Running Boards (red and black)-Left side is in fantastic shape, the right side needs the hole patched however. Easy fix though, no trim or mat however.-$225

Decklid-needs some work and patching up. Overall solid, just needs a skin patch on the outside and maybe some patching inside for the handle.-$250

Rumble seat riser pan, needs to be sandblasted but otherwise in great shape, no rust through, just surface rust.-$85

Sport coupe quarter panels. These are in good shape, no rust through, however the left side did sustain two gunshot wounds...easy to patch up. I may keep these to use for patching up my roadster. In great shape.

Reinforcement for the panel under the decklid/trunk-offer?

Rear cross sill (missing the inner structure)-Offers?

Panel above the rumble seat with latch-offers?

Rear fenders-$30 each

Front fenders without tire wells, all need some sort of work-$50 each

Front fender with tire-driver's side, really pretty decent shape!-$300

Front fender with wheel well passenger side, OK shape, will need some patching-$200

Feel free to PM me if you have questions or want additional photos. Prices are OBO.

Thanks!

Model A Fan · 09-16-2012, 10:44 PM

Model A Fan · 09-16-2012, 10:46 PM

Model A Fan · 09-16-2012, 10:51 PM

Model A Fan · 09-16-2012, 10:54 PM

Model A Fan · 09-16-2012, 10:55 PM

Sponsored Links (Register now to hide all advertisements)

Model A Fan · 09-16-2012, 10:56 PM

fordgarage · 09-17-2012, 05:57 AM

Quote:

Sport coupe quarter panels. These are in good shape, no rust through, however the left side did sustain two gunshot wounds...easy to patch up. I may keep these to use for patching up my roadster.-$600 for the pair. In great shape.

FYI, They won't fit/patch a roadster in any way.

the32ford · 09-17-2012, 06:58 AM

Sendt you PM

Model A Fan · 09-20-2012, 12:59 AM

Bump to the top, lots of interest and a few pendings.
Thanks!

freeatlast66 · 09-22-2012, 09:18 AM

how much for the rear quarter panels. I know you said you might use them but if you decide not to, i could.

09-16-2012, 10:42 PM	#1
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe City: Bellingham State: WA Price: In Ad Its time to clean out the garage and sell a bunch of extra sheet metal, some in pretty good shape to some in decent shape, but it may take a little work. I would gladly trade for good condition Model A banger/speed parts. Looking for a double intake, downdraft carbs, high compression head, lakes headers, etc. Please let me know what you have. Also interested in shock linkages too. It is all for 30-31 bodies, primarily coupe, sport coupe and roadsters. All prices are excluding shipping. Running Boards (Gray)-these are in fantastic shape. No dents, dings or rust at all! Masking tape is over the chrome still to protect it from scuffs and scrapes. Has the splash aprons welded on! Nice US made part!-$275 Running Boards (red and black)-Left side is in fantastic shape, the right side needs the hole patched however. Easy fix though, no trim or mat however.-$225 Decklid-needs some work and patching up. Overall solid, just needs a skin patch on the outside and maybe some patching inside for the handle.-$250 Rumble seat riser pan, needs to be sandblasted but otherwise in great shape, no rust through, just surface rust.-$85 Sport coupe quarter panels. These are in good shape, no rust through, however the left side did sustain two gunshot wounds...easy to patch up. I may keep these to use for patching up my roadster. In great shape. Reinforcement for the panel under the decklid/trunk-offer? Rear cross sill (missing the inner structure)-Offers? Panel above the rumble seat with latch-offers? Rear fenders-$30 each Front fenders without tire wells, all need some sort of work-$50 each Front fender with tire-driver's side, really pretty decent shape!-$300 Front fender with wheel well passenger side, OK shape, will need some patching-$200 Feel free to PM me if you have questions or want additional photos. Prices are OBO. Thanks! Last edited by Model A Fan; 09-17-2012 at 07:41 PM. Reason: Update trade options for banger/speed equipment

09-16-2012, 10:44 PM	#2
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

09-16-2012, 10:46 PM	#3
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

09-16-2012, 10:51 PM	#4
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

09-16-2012, 10:54 PM	#5
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

09-16-2012, 10:55 PM	#6
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe Sponsored Links (Register now to hide all advertisements)

09-16-2012, 10:56 PM	#7
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

09-17-2012, 06:58 AM	#9
the32ford Junior Member Join Date: Jun 2010 Posts: 6	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe Sendt you PM

09-20-2012, 12:59 AM	#10
Model A Fan Senior Member Join Date: May 2010 Location: Bellingham, Washington Posts: 362	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe Bump to the top, lots of interest and a few pendings. Thanks!

09-22-2012, 09:18 AM	#11
freeatlast66 Junior Member Join Date: Aug 2012 Location: Wenatchee, Wa Posts: 5	Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe how much for the rear quarter panels. I know you said you might use them but if you decide not to, i could.