|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-29-2014, 10:58 AM | #1 |
Member
Join Date: Jul 2013
Location: Vashon, WA
Posts: 44
|
Radiator Mounts on 1941 Super Deluxe
Hello all,
I installed new water pumps and I am installing a new Walker radiator. The old mounts were kind of a mishmash of rubber, bolts and nuts. I ordered a kit from Macs. Each side contained a square rubber with a hole in the center, two springs, a bolt, a castle nut, and cotter pin. No instructions. In what order do the parts go? I assume the bolt comes up from the bottom of the frame through the correct hole, but then what? Do I need both springs? Also any tips on connecting the new lower radiator hoses would be appreciated. Thanks in advance! Hugh |
06-29-2014, 11:22 AM | #2 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,024
|
Re: Radiator Mounts on 1941 Super Deluxe
The rubber pad goes between the radiator mount and the lower frame flange. The bolt goes down from the top, spring installed from the bottom, then nut, then cotter pin. Don't compress the spring but just a little.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-29-2014, 11:54 AM | #3 |
Member
Join Date: Jul 2013
Location: Vashon, WA
Posts: 44
|
Re: Radiator Mounts on 1941 Super Deluxe
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|