|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-14-2017, 07:46 AM | #1 |
Senior Member
Join Date: May 2015
Location: Frelighsburg, QC
Posts: 166
|
Water Pump Rebuild Kits
I received an order for 2 water pump rebuild kits today (from one of the usual suppliers - but not Macs´!). These are for the 37´- 48´ style pump. Well, I found that both kits are missing the lock ring that fits in the groove in the end of the impeller (necessary to hold the seal assembly in place). This is part Ford´s original part number 8574.
Does anyone know where I might be able to source a new pair of these? Thanks in advance! |
12-14-2017, 08:15 AM | #2 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,257
|
Re: Water Pump Rebuild Kits
Been a long time since I've seen a kit that included them. They'll work fine without them . Just make sure when you put it together that the lugs on the seal are in the slots on the impeller so not to break the seal.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-14-2017, 01:20 PM | #3 |
Senior Member
Join Date: May 2010
Location: Everett, WA
Posts: 504
|
Re: Water Pump Rebuild Kits
I have an article on rebuilding water pumps on my site which might be of interest:
http://myplace.frontier.com/~wgmumaw...er%20pumps.htm |
12-14-2017, 05:41 PM | #4 |
Senior Member
Join Date: May 2015
Location: Frelighsburg, QC
Posts: 166
|
Re: Water Pump Rebuild Kits
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|