|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-21-2020, 10:37 AM | #1 |
Senior Member
Join Date: Feb 2011
Posts: 2,111
|
1935 Ford Temp Gauge
I want to run a 2nd temp gauge.
Did the 35 only have a provision for a temp probe in the drivers side water pump? Are the pumps interchangeable where I could run a drivers side pump on the passenger head?
__________________
Tim Downtown, Ca |
06-21-2020, 11:51 AM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,155
|
Re: 1935 Ford Temp Gauge
replacement pumps had a plug so they could be used on either side
|
Sponsored Links (Register now to hide all advertisements) |
|
06-22-2020, 06:28 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 4,743
|
Re: 1935 Ford Temp Gauge
I am not aware of a RH, OEM or aftermarket pump with the temperature probe fitting. The LH pump can be used on the right but the fitting winds up under the generator, I am not sure if the temperature probe can be installed in this location.
|
06-22-2020, 07:27 AM | #4 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,301
|
Re: 1935 Ford Temp Gauge
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|