12-13-2018, 08:31 AM | #1 |
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 297
|
king pin fit
started to reassemble the front spindle and the book says put the king pin thru the spindle to see if there is play. didn't seem to be any. put the king pin thru the spindle and the axle and there seemed to be a lot of play. took it back out and measured the king pin. it looked like .81. is there a bushing that goes into the axle?
thanks Dick |
|
|
Sponsored Links (Register now to hide all advertisements) |
|