|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-18-2012, 03:13 PM | #1 |
Senior Member
Join Date: May 2010
Location: Indianapolis IN
Posts: 164
|
1935 1936 Windshield frame
City:
Indianapolis
State:
IN
Price:
$200
Solid frame no rust out. has one area with slight dip. comes with hinges and regulator. Not for sure if it is car or truck or if it matters.
|
03-18-2012, 06:59 PM | #2 |
Junior Member
Join Date: Nov 2011
Location: London, Kentucky
Posts: 15
|
Re: 1935 1936 Windshield frame
I am needing a frame for a 36 Ford truck but have already bought one that ended up being from a car and they will not work. You have any idea what your frame came off? I am interested.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-19-2012, 07:46 AM | #3 |
Senior Member
Join Date: May 2010
Location: Norridgewock,Maine
Posts: 657
|
Re: 1935 1936 Windshield frame
What are the measurements at center both ways? I believe the truck is narrower in both directions than the car.Someone correct me if I'm wrong.
|
03-19-2012, 10:31 AM | #4 |
Member
Join Date: Sep 2010
Location: San Diego
Posts: 92
|
Re: 1935 1936 Windshield frame
OK ya got me thinking about the frames ? I have both a 35 truck and a sedan The tape measure said the sedan has 44 3/8" wide and 14 5/8 tall,,, the truck measures 45 1/4" wide and 15 1/8" tall. Now I'm not posivtive the truck is correct. After cleaning and repairing and plating the truck frame its weak and fraigle and leaks in rain and at the car wash. But I'm suprised about the diffrence. Hope this helps.
|
03-19-2012, 09:10 PM | #5 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: 1935 1936 Windshield frame
Yes, 35-36 W/S frames are same for trucks, but will not work on sedans. Regulator will be same on both
|
03-20-2012, 06:46 AM | #6 |
BANNED
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
|
Re: 1935 1936 Windshield frame
Sponsored Links (Register now to hide all advertisements)
|
03-28-2012, 04:24 PM | #7 |
Senior Member
Join Date: May 2010
Location: Indianapolis IN
Posts: 164
|
Re: 1935 1936 Windshield frame
btt
|
04-15-2012, 08:40 PM | #8 |
Senior Member
Join Date: May 2010
Location: Indianapolis IN
Posts: 164
|
Re: 1935 1936 Windshield frame
Btt
|
04-17-2012, 07:21 AM | #9 |
Junior Member
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
|
Re: 1935 1936 Windshield frame
My 36 truck measures 45" across at seam and 15 1/2" at middle do you know what your is??
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|