Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-11-2019, 07:33 PM   #1
Digger
Senior Member
 
Digger's Avatar
 
Join Date: May 2010
Location: Pacific Grove, CA
Posts: 1,210
Default Warning about c&g

I bought a new gas tank for 33-34 (part 40-9002-OR) and was told by them I would need part number 40-9003 to adapt the original sending unit to this new tank. $45 bucks. See page 121 of their catalog.

IT DOES NOT FIT, THE HOLES DO NOT LINE UP! My mechanic shop of over 25 years of working on my cars called them, to be told we didn’t know what we are doing. The employee on the phone rude and refused to listen. I spent thousands of dollars on parts, will never spend another penny with them.

Have been told by our local EFV8 parts place that they sold me a ‘35 adapter. Their catalog and part are incorrect.
Digger is offline   Reply With Quote
Old 09-11-2019, 07:48 PM   #2
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,965
Default Re: Warning about c&g

Typical of today's customer service. I emailed Rock Auto about sending them a part for repair (they use a third party for the repair). All they did was give me some instructions for their web site that were no good. I complained to them about it, no reply
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-11-2019, 08:06 PM   #3
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Warning about c&g

I hope you called them back and asked for a manager. This doesn't sound typical of C&G and the management should know about it. Be sure to let us know what happens.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Old 09-11-2019, 08:28 PM   #4
Straightpipes
Senior Member
 
Straightpipes's Avatar
 
Join Date: May 2010
Location: Ballston Spa, NY
Posts: 789
Default Re: Warning about c&g

I like C&G.
Straightpipes is offline   Reply With Quote
Old 09-11-2019, 08:28 PM   #5
qmdv
Senior Member
 
qmdv's Avatar
 
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
Default Re: Warning about c&g

Have had no problems with C and G. You ended up with a jerk. Every company has a few
qmdv is offline   Reply With Quote
Old 09-11-2019, 08:32 PM   #6
Russ/40
Senior Member
 
Russ/40's Avatar
 
Join Date: May 2010
Location: Santee, California
Posts: 3,505
Default Re: Warning about c&g

Sponsored Links (Register now to hide all advertisements)
This is one of those posts that defies all other experiences.. In fact, having done business with them for over thirty years, I have never heard another complaint like it. I'm flabbergasted. Since your mechanic made the call, can you be sure he didn't imbelish a bit out of frustration? I suggest you call them personally, and ask for Kyle. Whatever happened C&G will make it right.
Russ/40 is offline   Reply With Quote
Old 09-11-2019, 08:38 PM   #7
Digger
Senior Member
 
Digger's Avatar
 
Join Date: May 2010
Location: Pacific Grove, CA
Posts: 1,210
Default Re: Warning about c&g

It doesn’t fit, it’s the wrong part. It’s a round hole square peg situation. Holes don’t line up, size too large. We wouldn’t call them if it fit, I would be driving the car right now. I will just dispute the charge and move on, venting here got me over it, no need to sweat it any further. Thanks Barners.
Digger is offline   Reply With Quote
Old 09-11-2019, 08:41 PM   #8
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,543
Default Re: Warning about c&g

sorry to hear you had some problems, but as others have stated, they are normally quite high on my list of places to do business with. hope you get it sorted out
cas3 is offline   Reply With Quote
Old 09-11-2019, 09:06 PM   #9
51504bat
Senior Member
 
51504bat's Avatar
 
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 2,997
Default Re: Warning about c&g

Just as an example I recently ordered a headlight switch for my '54 Ranch Wagon from Shoe Box Central. They sent me a Dennis Carpenter switch that was defective. Sent them an email and followed it up with a phone call. They said they would send another switch that day. Point is that even good vendors get bad parts from good suppliers. It's unfortunate but it happens. If the guy at C&G couldn't/wouldn't fix the problem you just have to move up the food chain. I've bought a bunch of parts from C&G and never have had a problem. Given the chance they should make it right. A photo or 2 in an email might help as well. JMO.
__________________
Making the simple complicated for over 30 years.
51504bat is offline   Reply With Quote
Old 09-11-2019, 09:19 PM   #10
Steve in Denver
Senior Member
 
Steve in Denver's Avatar
 
Join Date: May 2017
Posts: 563
Default Re: Warning about c&g

For my '36, I had a similar mis-fitment problem with the stainless steel tank I got from Drake. I did get the adapter and no matter which way I turned it, even upside down, it did not fit. I would up redrilling a couple of holes then use a gas resistant Permatex to seal it up.


I also found that the stainless steel tank had two holes, one for the sending unit and one for the internal fuel pump, which I did not purchase, but neither of the holes lined up with where the access opening was in the trunk. You would think they could have checked that when they were making it.
Steve in Denver is offline   Reply With Quote
Old 09-11-2019, 09:54 PM   #11
leon bee
Senior Member
 
Join Date: May 2017
Location: Arkansas
Posts: 611
Default Re: Warning about c&g

I should stay out of this, but the thread title is is kind of an incitement. I've bought parts from C and G four or five times now, and I am 100 percent satisfied in every respect. You just can't always say that these days.
leon bee is offline   Reply With Quote
Old 09-11-2019, 09:54 PM   #12
uncle max
Senior Member
 
uncle max's Avatar
 
Join Date: May 2010
Location: SLC Utah
Posts: 798
Default Re: Warning about c&g

Quote:
Originally Posted by Steve Kennedy View Post
For my '36, I had a similar mis-fitment problem with the stainless steel tank I got from Drake. I did get the adapter and no matter which way I turned it, even upside down, it did not fit. I would up redrilling a couple of holes then use a gas resistant Permatex to seal it up.


I also found that the stainless steel tank had two holes, one for the sending unit and one for the internal fuel pump, which I did not purchase, but neither of the holes lined up with where the access opening was in the trunk. You would think they could have checked that when they were making it.
^Chinese Checkers!
__________________
RIP Tyler... My Son, Helper & Best Friend.
Feb '78 to Father's Day '10.
www.97-express.com ~ [email protected]
uncle max is offline   Reply With Quote
Old 09-11-2019, 10:07 PM   #13
zzlegend
Senior Member
 
zzlegend's Avatar
 
Join Date: May 2010
Location: Reseda, Calif.
Posts: 2,188
Default Re: Warning about c&g

Been dealing with them for years and no problems. Not to say that it could happen. I think Kyle would make it right for you. Just my 2 cents.
zzlegend is offline   Reply With Quote
Old 09-11-2019, 10:27 PM   #14
WABOOM
Senior Member
 
WABOOM's Avatar
 
Join Date: Jun 2018
Location: Minnesota
Posts: 347
Default Re: Warning about c&g

I've ordered 2 different items from C&G and both were not correct for my bone stock genny '51 Mercury even though they were listed as correct. Returning them would cost more than throwing them in the trash can.
WABOOM is offline   Reply With Quote
Old 09-12-2019, 03:39 AM   #15
RKS.PA
Senior Member
 
RKS.PA's Avatar
 
Join Date: Jun 2010
Location: Marana, AZ
Posts: 1,192
Default Re: Warning about c&g

Quote:
Originally Posted by zzlegend View Post
Been dealing with them for years and no problems. Not to say that it could happen. I think Kyle would make it right for you. Just my 2 cents.
My experience with C &G as well. Your experience is frustrating, but I'm in the camp that says that you, and not "your mechanic" need to talk with Kyle or Joe.

If you do that, I'm betting serious money your problem with be resolved to your satisfaction.

Please let us know how this turns out and good luck with your project.
RKS.PA is offline   Reply With Quote
Old 09-12-2019, 03:47 AM   #16
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,260
Default Re: Warning about c&g

Sorry about your experience, but I'm with the majority on this. I also agree with those who believe that you did not adequately try to redress your grievance before posting negative information on a public board.
tubman is offline   Reply With Quote
Old 09-12-2019, 05:02 AM   #17
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,279
Default Re: Warning about c&g

Last year I placed an order that included (NOS)piston rings for my 36 LB motor.I called and wanted to make sure they were for 3 ring pistons.They weren't sure but would check.They called me back in France and confirmed to me that they were for 4 ring pistons so removed them from my order.They have always been accommodating especially to save on shipping charges.
deuce lover is offline   Reply With Quote
Old 09-12-2019, 05:59 AM   #18
richard crow
Senior Member
 
Join Date: May 2010
Posts: 1,764
Default Re: Warning about c&g

most of us are old & in our day things were a lot different. people were help full & careing it,s a lot different today. the america we grew up in is gone.
richard crow is offline   Reply With Quote
Old 09-12-2019, 07:09 AM   #19
chap52
Senior Member
 
chap52's Avatar
 
Join Date: Jun 2013
Location: Marana Arizona
Posts: 1,771
Default Re: Warning about c&g

I always had great service and parts from them. Please call Kyle and explain the issue directly. I am sure he will appreciate the information on both the part and the response your mechanic got.
We can all mummer in our tents, but it rarely gets things fixed (Deuteronomy 1:27)
Chap
chap52 is offline   Reply With Quote
Old 09-12-2019, 08:15 AM   #20
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Warning about c&g

Quote:
Originally Posted by Digger View Post
It doesn’t fit, it’s the wrong part. It’s a round hole square peg situation. Holes don’t line up, size too large. We wouldn’t call them if it fit, I would be driving the car right now. I will just dispute the charge and move on, venting here got me over it, no need to sweat it any further. Thanks Barners.
Please call them (Kyle?) before you dispute the charge. Once someone in management hears the story they may just send you a check. It sounds like someone is there that shouldn't be and your call will help everyone.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:37 AM.