Oil filter

[1942 f1]

I posted a while back about the return line on a 39 model motor, had several responses on this including a banjo bolt on the fuel pump stand. I cant find one that will work,but i saw a intake that had a plug on the fuel pump stand,right beside the glass bowl on the fuel pump. I have a aluminum intake that has the same fitting in it. Is it possable to return the oil to the motor on that fitting,thanks

[Kube]

I recall your original post as it turned out you were not concerned with authenticity.
So, that being the case, you can return the oil anywhere you'd like. Being returned through a fitting in the valve chamber cover would certainly be a functional method.

[1942 f1]

Sponsored Links (Register now to hide all advertisements)

Thanks for reply,I have looked all over for banjo fitting with no luck. This looks like the best option for me now. Thanks again