Radiator hoses

[Tom maxwell]

I want to change out my radiator hoses but just want to purchase them from a local auto store. I have the lengths from the regulars.....snyders... but nobody lists the I D.
I was looking to buy before I remove, but can not find a site or previous threads that has that size.
Can anybody give me the I D to all 3 hoses

Thanks
Tom
Also can someone supply the nearest club to the Westchester area just north of NYC

[Tom Wesenberg]

Bottom two hoses are 1 3/4" and the top hose is 2" ID. You'll probably pay more at the local stores because they sell straight hose by the INCH, and it ain't cheap.

I'd buy from the dealers.

[Mitch//pa]

Originally Posted by Tom Wesenberg

Bottom two hoses are 1 3/4" and the top hose is 2" ID. You'll probably pay more at the local stores because they sell straight hose by the INCH, and it ain't cheap.

I'd buy from the dealers.

2nd that and it looks better

[Tom maxwell]

Thanks TomI was on the bubble to go out on my own to find them , but your probably right. I will go to Snyders

[Tom Wesenberg]

You'll be glad you made the right choice. I usually look through the catalogs to see what else I need to help offset the shipping.

I also put vaseline on the inside of the hose and on the inside of the clamps. The hoses will install and be removed easier this way, and the clamps can better seat around the hose without bunching the rubber.

[Mitch//pa]

Sponsored Links (Register now to hide all advertisements)

correct placement of hoses and clamps

[Mike V. Florida]

Originally Posted by Tom maxwell

Thanks TomI was on the bubble to go out on my own to find them , but your probably right. I will go to Snyders

You can also check out Tams in Mass.

BTW, I was born and raised in Rye.

[Tom maxwell]

Thanks MikeI'm in Eastchecter for 30. Years ago I used to do the marmarineck ..sp... Show.
Put the car away for 10 years and recently relit the flame.