The Ford Barn

tommyleea · 10-26-2019, 10:06 PM

So, my next project is brakes. Master cylinder is missing. Just stock brakes, and the master cylinder mounts on the frame. I know there should be a distribution block somewhere to direct the fluid to front and rear brakes. I don't see any on the frame. Would it be mounted on the master cylinder? Shop manual is unclear. Thanks

KULTULZ · 10-27-2019, 06:17 AM

Below are ILL's of the 55 FI00 System -

tommyleea · 10-27-2019, 07:07 AM

Quote:

Originally Posted by KULTULZ

Below are ILL's of the 55 FI00 System -

Thanks..Don't know how I missed that. It appears all the lines go into a fitting on the master cylinder itself.

KULTULZ · 10-27-2019, 07:35 AM

Quote:

Originally Posted by tommyleea

Thanks..Don't know how I missed that. It appears all the lines go into a fitting on the master cylinder itself.

The Ill is from a FORD PARTS BOOK.

paul2748 · 10-27-2019, 07:28 PM

Looks like part # 2076 is the block.

mobileparts · 10-28-2019, 11:08 PM

Sponsored Links (Register now to hide all advertisements)

If you would like a U.S.A. manufactured NEW Master Cylinder ( and Wheel Cylinders, Brake Shoes, Brake Hoses, etc., etc.),
Call me -- Craig -- 516 - 485 - 1935.... West Hempstead, Long Island, New York....

mobileparts · 11-07-2019, 02:35 AM

You aren't going to fix it, after all??????

tommyleea · 11-07-2019, 11:22 AM

Quote:

Originally Posted by mobileparts

You aren't going to fix it, after all??????

Fighting kingpins right now. Thanks for the info...

mobileparts · 11-08-2019, 12:21 AM

I have U.S.A. made King Pins and Pin Kits also.....
You have the phone number -- no fighting required.....

tommyleea · 11-23-2019, 12:35 PM

Quote:

Originally Posted by paul2748

Looks like part # 2076 is the block.

That is the part I need. Distribution block that bolts to the master cylinder. Would anyone have one laying around? Maybe converted their brakes from the single master cylinder, and still has this part? I have one on order, but it is backordered, and it doesn't look promising at this point. Any help would be appreciated.

KULTULZ · 11-23-2019, 03:34 PM

Quote:

Originally Posted by tommyleea

That is the part I need. Distribution block that bolts to the master cylinder. Would anyone have one laying around? Maybe converted their brakes from the single master cylinder, and still has this part? I have one on order, but it is backordered, and it doesn't look promising at this point. Any help would be appreciated.

8C 2076 - GOOGLE that PN and you will find it.

tommyleea · 11-23-2019, 10:54 PM

Quote:

Originally Posted by KULTULZ

8C 2076 - GOOGLE that PN and you will find it.

Thanks...I did find it, and it is on order, but it is backordered.

KULTULZ · 11-24-2019, 01:46 AM

Try EvilBay?

https://www.ebay.com/itm/1948-56-For...-/352485779573

poolplayer1 · 11-24-2019, 12:31 PM

Sorry to get into this matter but I have a question for Kultulz. Do you by any chance have a parts breakdown and maybe part #'s of the emergency brake ? I am missing some parts so would like to identify them so i can order and install in my 55.
It is a 1955 ford Ranch Wagon. I saw the diagram above but my car has a different design that this one. Thank you kindly.

tommyleea · 11-24-2019, 03:17 PM

Quote:

Originally Posted by KULTULZ

Try EvilBay?

https://www.ebay.com/itm/1948-56-For...-/352485779573

Thanks KULTULZ..I did look on Ebay, but the one I looked at was out of stock. Your number worked, and it is on order. Cheers!

KULTULZ · 11-24-2019, 04:23 PM

Quote:

Originally Posted by poolplayer1

Sorry to get into this matter but I have a question for Kultulz. Do you by any chance have a parts breakdown and maybe part #'s of the emergency brake ?

I am missing some parts so would like to identify them so i can order and install in my 55.

It is a 1955 ford Ranch Wagon. I saw the diagram above but my car has a different design that this one. Thank you kindly.

Here you go. The ILL is broken into two parts as my scanner is on the fritz.

Give me the PN's you need from the Ill and I will post the complete PN.

10-26-2019, 10:06 PM	#1
tommyleea Senior Member Join Date: Jul 2016 Location: Missouri Posts: 424	55 F100 Master Cylinder So, my next project is brakes. Master cylinder is missing. Just stock brakes, and the master cylinder mounts on the frame. I know there should be a distribution block somewhere to direct the fluid to front and rear brakes. I don't see any on the frame. Would it be mounted on the master cylinder? Shop manual is unclear. Thanks

10-27-2019, 07:28 PM	#5
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,980	Re: 55 F100 Master Cylinder Looks like part # 2076 is the block. __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria

10-28-2019, 11:08 PM	#6
mobileparts Senior Member Join Date: Feb 2014 Location: West Hempstead, New York Posts: 167	Re: 55 F100 Master Cylinder Sponsored Links (Register now to hide all advertisements) If you would like a U.S.A. manufactured NEW Master Cylinder ( and Wheel Cylinders, Brake Shoes, Brake Hoses, etc., etc.), Call me -- Craig -- 516 - 485 - 1935.... West Hempstead, Long Island, New York....

11-07-2019, 02:35 AM	#7
mobileparts Senior Member Join Date: Feb 2014 Location: West Hempstead, New York Posts: 167	Re: 55 F100 Master Cylinder You aren't going to fix it, after all??????

11-08-2019, 12:21 AM	#9
mobileparts Senior Member Join Date: Feb 2014 Location: West Hempstead, New York Posts: 167	Re: 55 F100 Master Cylinder I have U.S.A. made King Pins and Pin Kits also..... You have the phone number -- no fighting required.....

11-24-2019, 01:46 AM	#13
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,466	Re: 55 F100 Master Cylinder Try EvilBay? https://www.ebay.com/itm/1948-56-For...-/352485779573 __________________ *** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ... DIAGNOSED CDO** - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 11-24-2019 at 02:40 AM.

11-24-2019, 12:31 PM	#14
poolplayer1 Senior Member Join Date: Sep 2015 Posts: 399	Re: 55 F100 Master Cylinder Sorry to get into this matter but I have a question for Kultulz. Do you by any chance have a parts breakdown and maybe part #'s of the emergency brake ? I am missing some parts so would like to identify them so i can order and install in my 55. It is a 1955 ford Ranch Wagon. I saw the diagram above but my car has a different design that this one. Thank you kindly.