|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-16-2013, 03:29 PM | #1 |
Member
Join Date: Jul 2011
Location: Sunny Northern California
Posts: 59
|
Right or Left Tail Light Bracket?
Hello, Barners
I found a repop tail light bracket that appears to never have been mounted. But I'm not sure how to tell if it's a right -ie or a left -ie. Any suggestions? Thanks mm |
02-16-2013, 03:44 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 4,179
|
Re: Right or Left Tail Light Bracket?
MM,
1. Place fender mounting flange flat against a wall. 2. Face the same wall & look at the bracket. 3. If the tail light flange veers left, at an angle, it goes on the left fender, driver's side. 4. If the tail light flange veers right at an angle, it goes on the right fender, passenger's side. 5. If providing a passenger's side tail light, measure the distance from the top of the tail light to the floor on the driver's side & provide same measurement to top of tail light on passenger's side -- forget about the dimension from the floor to the fender bolt holes -- the eye will concentrate on level "tops" of tail lights. Hope this helps. Last edited by H. L. Chauvin; 02-16-2013 at 03:45 PM. Reason: typo |
Sponsored Links (Register now to hide all advertisements) |
|
02-16-2013, 03:53 PM | #3 |
Member
Join Date: Jul 2011
Location: Sunny Northern California
Posts: 59
|
Thank you !!
Sponsored Links (Register now to hide all advertisements)
It makes the hobby a lot easier and more fun. Best wishes. mm |
|
|
Sponsored Links (Register now to hide all advertisements) |
|